[Sun May 27 11:30:15 2012] Detection parameters:
  Position = (339.9, 315.9) = 11 4 27.43 38 12 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137083.2 +/- 449.6
  Background counts = 44.1
  Rate = 8 +/- 0.03

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 3.26'
[Sun May 27 12:55:35 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Sun May 27 12:55:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.722
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.06"
[Sun May 27 15:07:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 15:07:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 15:07:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 15:07:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 15:07:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 15:07:35 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 18:50:28 2012] Spatial fit model total counts = 169767.000000, observed total counts = 171881.000000
[Sun May 27 18:50:28 2012] Offset between fit and detection position for source 1 = 0.243307 pixels
[Sun May 27 18:50:28 2012] 169580.000000 total counts/ 25600.000000 bgd. counts: snr = 899.875000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.243307 pixels
  Position = (339.7, 315.8) = 11 4 27.50 38 12 31.5
  Extent = 10.4 (10.4-10.5)", rotation angle = 0
  Source counts = 143980.0 +/- 411.8
  Background counts = 25600.0
  Rate = 7 +/- 0.02
[Sun May 27 18:50:28 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:28 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:28 2012] Source does appear to be extended
[Sun May 27 18:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:55:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 19:55:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 19:55:20 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Sun May 27 19:55:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Sun May 27 19:55:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.44"
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 21:19:34 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 23:58:38 2012] Spatial fit model total counts = 180576.000000, observed total counts = 181151.000000
[Sun May 27 23:58:38 2012] Offset between fit and detection position for source 1 = 0.014090 pixels
[Sun May 27 23:58:38 2012] 180615.000000 total counts/ 36100.000000 bgd. counts: snr = 760.605263
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014090 pixels
  Position = (339.7, 315.8) = 11 4 27.50 38 12 31.5
  Extent = 10.5 (10.4-10.5)", rotation angle = 0
  Source counts = 144515.0 +/- 425.0
  Background counts = 36100.0
  Rate = 7 +/- 0.02
[Sun May 27 23:58:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:38 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:38 2012] Source does appear to be extended
[Sun May 27 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:25:50 2012] Counts = 144515.000000, rescaling region sizes by 3.000000
[Mon May 28 01:25:50 2012] XMMSAS src. selection expression = ellipse(29507.856300, 27422.144800, 1884.060054, 1884.060054, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing source region out to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 01:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (231, 207) - (448, 424)
[Mon May 28 01:25:50 2012] XMMSAS bgd. selection expression = annulus(29507.856300, 27422.144800, 9420.300271, 18840.600542, X, Y) && !ellipse(29001.224274, 28509.486298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.356000, 28868.906000, 436.060813, 436.060813, 0.000000, X, Y) && !ellipse(25634.336487, 30140.916840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.947760, 29699.916400, 506.716015, 506.716015, 0.000000, X, Y) && !ellipse(30192.474854, 29398.496307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25449.152120, 25570.557800, 398.060011, 398.060011, 0.000000, X, Y) && !ellipse(35029.476257, 29065.996368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10164.303200, 25225.300400, 531.808015, 531.808015, 0.000000, X, Y) && !ellipse(27434.364044, 25960.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22855.788000, 22515.154000, 2450.160071, 2450.160071, 0.000000, X, Y) && !ellipse(27311.842000, 28120.690000, 1200.384035, 1200.384035, 0.000000, X, Y) && !ellipse(23711.684000, 23217.828000, 1225.080035, 1225.080035, 0.000000, X, Y) && !ellipse(24378.248000, 23650.590000, 1168.680034, 1168.680034, 0.000000, X, Y) && !ellipse(25001.048000, 24163.562000, 2337.360067, 2337.360067, 0.000000, X, Y) && !ellipse(25974.360000, 24812.084000, 1126.632032, 1126.632032, 0.000000, X, Y) && !ellipse(23437.450000, 35823.784000, 1747.216050, 1747.216050, 0.000000, X, Y) && !ellipse(22215.376000, 37449.332000, 1768.192051, 1768.192051, 0.000000, X, Y) && !ellipse(24703.032000, 33834.476000, 1520.456044, 1520.456044, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1.gif
[Mon May 28 01:25:59 2012] Mean detx,y = (-2313.88, 2405.45) 
[Mon May 28 01:26:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:31:40 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:31:40 2012] Setting source spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 01:31:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=7.46, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 8.2e-11
[Mon May 28 05:55:38 2012] Reading fit data from xmm0153950701/analysis//spectral/fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 05:55:38 2012] Spectral fit parameter nH value = 3.29207e+20
[Mon May 28 05:55:38 2012] Spectral fit parameter PhoIndex value = 2.71328
[Mon May 28 05:55:38 2012] Failed to get F(0.3-8.0) from xmm0153950701/analysis//spectral/fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 05:55:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:55:38 2012] Using Nh = 3.3e+20, photon index=2.71, rate=7.46, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:55:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:55:38 2012] Updating source flux to 6.7e-11