[Thu Jun 20 07:20:24 2013] Detection parameters:
  Position = (337.7, 340.4) = 11 4 22.31 38 12 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7187.6 +/- 127.6
  Background counts = 265.0
  Rate = 0.3 +/- 0.005

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 4.17'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Thu Jun 20 07:30:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.704
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.51"
[Thu Jun 20 22:52:51 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 20 22:52:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 22:52:51 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 20 22:52:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4.csv
[Thu Jun 20 22:52:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Spatial fit model total counts = 217899.000000, observed total counts = 75102.000000
[Fri Jun 21 10:54:58 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:54:58 2013] Source 4 is offset by -1.069364 and 1.583930 pixels which is larger than
2 X fitted extent = 7.765655 x 0.984299, not incorporating fit results
[Fri Jun 21 10:54:58 2013] Source 4 is offset by -4.464444 and -6.279656 pixels which is larger than
2 X fitted extent = 2.793577 x 2.793577, not incorporating fit results
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Fri Jun 21 10:56:11 2013] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.704
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.51"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Spatial fit model total counts = 191135.000000, observed total counts = 75102.000000
[Sat Jun 22 12:08:14 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:14 2013] Source 4 is offset by -0.776168 and 1.590298 pixels which is larger than
2 X fitted extent = 7.765655 x 0.981071, not incorporating fit results
[Sat Jun 22 12:08:14 2013] Source 4 is offset by -4.457755 and -6.266231 pixels which is larger than
2 X fitted extent = 2.846009 x 2.846009, not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:12 2013] Counts = 7187.635254, rescaling region sizes by 2.000000
[Sat Jun 22 12:09:12 2013] XMMSAS src. selection expression = ellipse(29329.205353, 29566.195923, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:12 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 22 12:09:12 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (263, 265) - (413, 415)
[Sat Jun 22 12:09:12 2013] XMMSAS bgd. selection expression = annulus(29329.205353, 29566.195923, 4350.000000, 8700.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28012.958649, 31140.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27087.232239, 30420.552490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.542389, 30002.239349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29822.509796, 28771.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.719116, 27391.124237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.323059, 32074.425995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33632.667999, 30941.068329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30360.612549, 30497.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.120117, 30160.070221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.083832, 27562.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31931.107513, 25597.941345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.828888, 31721.293823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22994.424927, 36158.214172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.937775, 32065.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28908.457550, 31671.732391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29808.377075, 31288.667419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.486084, 30526.533295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31108.356415, 29579.471069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.888062, 29231.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25018.850250, 27884.195038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.664062, 26217.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.577911, 27009.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.497345, 25603.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.219604, 25190.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32162.448181, 23910.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31800.865051, 24397.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27919.816000, 37444.336000, 1834.848053, 865.424025, 83.170459, X, Y) && !ellipse(26929.326000, 25967.110000, 1085.488031, 610.965618, 126.435528, X, Y) && !ellipse(28833.155609, 25537.465088, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:12 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4.gif
[Sat Jun 22 12:44:28 2013] Mean detx,y = (2901.78, 110.09) 
[Sat Jun 22 12:44:50 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:48:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:48:33 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 22 12:48:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 09:57:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 09:57:13 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:28 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:28 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1247928.00
[Sun Jun 23 18:10:28 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_bgd.pi.gz = 37864.00
[Sun Jun 23 18:10:28 2013] Got source and background scale factors 3775389.000000, 102317279.000000
[Sun Jun 23 18:10:28 2013] User source parameters:
  Position = (337.7, 340.4) = 11 4 22.31 38 12 35.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1246530.9 +/- 1118.1
  Background aperture counts = 1397.1
  Rate = 3e+01 +/- 0.03

[Sun Jun 23 18:10:28 2013] Updating counts from extracted products
[Sun Jun 23 18:10:28 2013] Set source signif. to 1246530.86/37.38 = 33349.05
[Sun Jun 23 18:10:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:37 2013] Using photon index=1.80, rate=34, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 18:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:37 2013] Updating source flux to 1.2e-10
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete