[Thu Jun 20 07:20:27 2013] Detection parameters:
  Position = (366.1, 281.0) = 11 4 11.85 38 8 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 344.4 +/- 27.2
  Background counts = 125.0
  Rate = 0.01 +/- 0.001

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 5.07'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Thu Jun 20 07:30:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 29, frac = 1.106
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.96"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Spatial fit model total counts = -401.056000, observed total counts = 2022.000000
[Fri Jun 21 10:54:58 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:54:59 2013] Source is confused with source 35
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Fri Jun 21 10:56:11 2013] source mask rpix=2.1, npix_max = 26, mask sum = 29, frac = 1.106
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.96"
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Spatial fit model total counts = 2655.930000, observed total counts = 2022.000000
[Sat Jun 22 12:08:14 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:14 2013] XMMSAS src. selection expression = ellipse(31800.865051, 24397.358337, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:14 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_src.reg
[Sat Jun 22 12:09:14 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (329, 243) - (404, 318)
[Sat Jun 22 12:09:14 2013] XMMSAS bgd. selection expression = annulus(31800.865051, 24397.358337, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(31931.107513, 25597.941345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.664062, 26217.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.497345, 25603.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.219604, 25190.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32162.448181, 23910.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.155609, 25537.465088, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:14 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36.gif
[Sat Jun 22 13:49:21 2013] Mean detx,y = (2707.84, 6181.43) 
[Sat Jun 22 13:49:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:50:01 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:50:02 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jun 22 13:50:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun Jun 23 12:38:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:38:03 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:36 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:36 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1509.00
[Sun Jun 23 18:10:36 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_bgd.pi.gz = 2133.00
[Sun Jun 23 18:10:36 2013] Got source and background scale factors 1085950.000000, 4013892.000000
[Sun Jun 23 18:10:36 2013] User source parameters:
  Position = (366.1, 281.0) = 11 4 11.85 38 8 23.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 931.9 +/- 39.9
  Background aperture counts = 577.1
  Rate = 0.03 +/- 0.001

[Sun Jun 23 18:10:36 2013] Updating counts from extracted products
[Sun Jun 23 18:10:36 2013] Set source signif. to 931.92/24.02 = 38.79
[Sun Jun 23 18:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:38 2013] Using photon index=1.80, rate=0.0254, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36.arf
[Sun Jun 23 18:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:38 2013] Updating source flux to 1.4e-13
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete