[Thu Jun 20 07:20:26 2013] Detection parameters:
  Position = (356.0, 294.9) = 11 4 15.56 38 9 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.2 +/- 29.1
  Background counts = 177.9
  Rate = 0.01 +/- 0.001

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 4.18'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.52"
[Thu Jun 20 07:30:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.827
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 8.52"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Warning, spatial fit 30 centroid is now closest to src. 34
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:54:59 2013] Source is confused with source 34
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.52"
[Fri Jun 21 10:56:11 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.827
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 8.52"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Source 33 is offset by 2.498107 and -2.636006 pixels which is larger than
2 X fitted extent = 2.325743 x 7.663862, not incorporating fit results
[Sat Jun 22 12:08:14 2013] Warning, spatial fit 29 centroid is now closest to src. 34
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:14 2013] XMMSAS src. selection expression = ellipse(30923.497345, 25603.997467, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:14 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_src.reg
[Sat Jun 22 12:09:14 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (318, 257) - (393, 332)
[Sat Jun 22 12:09:14 2013] XMMSAS bgd. selection expression = annulus(30923.497345, 25603.997467, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32007.083832, 27562.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31931.107513, 25597.941345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.664062, 26217.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.219604, 25190.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32162.448181, 23910.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31800.865051, 24397.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.155609, 25537.465088, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:14 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33.gif
[Sat Jun 22 13:44:12 2013] Mean detx,y = (2712.73, 4681.90) 
[Sat Jun 22 13:44:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:44:51 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:44:52 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 22 13:44:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun 23 12:36:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:36:50 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:35 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:35 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1892.00
[Sun Jun 23 18:10:35 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1503.00
[Sun Jun 23 18:10:35 2013] Got source and background scale factors 1079666.000000, 2560145.000000
[Sun Jun 23 18:10:35 2013] User source parameters:
  Position = (356.0, 294.9) = 11 4 15.56 38 9 22.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1258.2 +/- 44.5
  Background aperture counts = 633.8
  Rate = 0.03 +/- 0.001

[Sun Jun 23 18:10:35 2013] Updating counts from extracted products
[Sun Jun 23 18:10:35 2013] Set source signif. to 1258.15/25.18 = 49.97
[Sun Jun 23 18:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:38 2013] Using photon index=1.80, rate=0.0343, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33.arf
[Sun Jun 23 18:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:38 2013] Updating source flux to 1.6e-13
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete