[Thu Jun 20 07:20:26 2013] Detection parameters:
  Position = (350.9, 301.9) = 11 4 17.44 38 9 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.9 +/- 30.5
  Background counts = 207.3
  Rate = 0.01 +/- 0.001

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 3.81'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Thu Jun 20 07:30:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.33"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Source 31 is offset by 4.438644 and -7.826855 pixels which is larger than
2 X fitted extent = 0.963775 x 5.071632, not incorporating fit results
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.33"
[Fri Jun 21 10:56:11 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.33"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Warning, spatial fit 27 centroid is now closest to src. 33
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:13 2013] XMMSAS src. selection expression = ellipse(30479.664062, 26217.075592, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun 22 12:09:13 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (313, 264) - (388, 339)
[Sat Jun 22 12:09:14 2013] XMMSAS bgd. selection expression = annulus(30479.664062, 26217.075592, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29822.509796, 28771.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.083832, 27562.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31931.107513, 25597.941345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.497345, 25603.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.219604, 25190.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32162.448181, 23910.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31800.865051, 24397.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.155609, 25537.465088, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:14 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31.gif
[Sat Jun 22 13:41:15 2013] Mean detx,y = (2701.94, 3903.06) 
[Sat Jun 22 13:41:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:41:52 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:41:52 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun 22 13:41:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jun 23 12:36:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:36:13 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:35 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:35 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 2458.00
[Sun Jun 23 18:10:35 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_bgd.pi.gz = 679.00
[Sun Jun 23 18:10:35 2013] Got source and background scale factors 1065278.000000, 1008000.000000
[Sun Jun 23 18:10:35 2013] User source parameters:
  Position = (350.9, 301.9) = 11 4 17.44 38 9 53.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1740.4 +/- 50.6
  Background aperture counts = 717.6
  Rate = 0.05 +/- 0.001

[Sun Jun 23 18:10:35 2013] Updating counts from extracted products
[Sun Jun 23 18:10:35 2013] Set source signif. to 1740.42/26.79 = 64.97
[Sun Jun 23 18:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:38 2013] Using photon index=1.80, rate=0.0474, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31.arf
[Sun Jun 23 18:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:38 2013] Updating source flux to 2.2e-13
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete