[Thu Jun 20 07:20:24 2013] Detection parameters:
  Position = (332.0, 348.2) = 11 4 24.41 38 13 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10365.4 +/- 163.4
  Background counts = 256.9
  Rate = 0.4 +/- 0.006

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 4.35'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Thu Jun 20 07:30:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.692
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.60"
[Thu Jun 20 22:52:51 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 20 22:52:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 22:52:51 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 20 22:52:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 22:52:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Spatial fit model total counts = 400839.000000, observed total counts = 122919.000000
[Fri Jun 21 10:54:58 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Fri Jun 21 10:56:11 2013] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.692
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.60"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Spatial fit model total counts = 205794.000000, observed total counts = 122919.000000
[Sat Jun 22 12:08:14 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:12 2013] Counts = 10365.405273, rescaling region sizes by 3.000000
[Sat Jun 22 12:09:12 2013] XMMSAS src. selection expression = ellipse(28833.067993, 30246.815338, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:12 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 22 12:09:12 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (219, 236) - (444, 461)
[Sat Jun 22 12:09:12 2013] XMMSAS bgd. selection expression = annulus(28833.067993, 30246.815338, 9787.500000, 19575.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(29329.205353, 29566.195923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.958649, 31140.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27087.232239, 30420.552490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.542389, 30002.239349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29822.509796, 28771.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.719116, 27391.124237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.323059, 32074.425995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33632.667999, 30941.068329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30360.612549, 30497.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.120117, 30160.070221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.083832, 27562.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9239.660011, 26137.161865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31931.107513, 25597.941345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.828888, 31721.293823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22994.424927, 36158.214172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.937775, 32065.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28908.457550, 31671.732391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29808.377075, 31288.667419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15249.677917, 31128.412506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.486084, 30526.533295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31108.356415, 29579.471069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.888062, 29231.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25018.850250, 27884.195038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23315.319733, 19262.692307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15064.733887, 27626.298767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.664062, 26217.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.577911, 27009.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30923.497345, 25603.997467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.219604, 25190.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32162.448181, 23910.510925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31800.865051, 24397.358337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.030762, 39301.099792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27919.816000, 37444.336000, 1834.848053, 865.424025, 83.170459, X, Y) && !ellipse(26929.326000, 25967.110000, 1085.488031, 610.965618, 126.435528, X, Y) && !ellipse(28833.155609, 25537.465088, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:12 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3.gif
[Sat Jun 22 12:32:02 2013] Mean detx,y = (2770.40, -2.29) 
[Sat Jun 22 12:32:44 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 12:42:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 12:42:18 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 22 12:42:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 23 09:55:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 09:55:38 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:27 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:27 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 2183014.00
[Sun Jun 23 18:10:27 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 29979.00
[Sun Jun 23 18:10:27 2013] Got source and background scale factors 8979387.000000, 117993097.000000
[Sun Jun 23 18:10:27 2013] User source parameters:
  Position = (332.0, 348.2) = 11 4 24.41 38 13 11.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2180732.6 +/- 1478.5
  Background aperture counts = 2281.4
  Rate = 6e+01 +/- 0.04

[Sun Jun 23 18:10:27 2013] Updating counts from extracted products
[Sun Jun 23 18:10:27 2013] Set source signif. to 2180732.57/47.76 = 45656.10
[Sun Jun 23 18:10:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:37 2013] Using photon index=1.80, rate=59.4, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3.arf
[Sun Jun 23 18:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:37 2013] Updating source flux to 2.3e-10
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete