[Thu Jun 20 07:20:26 2013] Detection parameters:
  Position = (288.1, 321.1) = 11 4 40.59 38 11 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 278.4 +/- 33.1
  Background counts = 198.3
  Rate = 0.009 +/- 0.001

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 1.80'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu Jun 20 07:30:07 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.33"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Warning, spatial fit 25 centroid is now closest to src. 9
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Jun 21 10:56:11 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.33"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Source 28 is offset by -6.495032 and -3.191517 pixels which is larger than
2 X fitted extent = 6.346805 x 6.740184, not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:13 2013] XMMSAS src. selection expression = ellipse(25018.850250, 27884.195038, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun 22 12:09:13 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (251, 284) - (326, 359)
[Sat Jun 22 12:09:13 2013] XMMSAS bgd. selection expression = annulus(25018.850250, 27884.195038, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27087.232239, 30420.552490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.542389, 30002.239349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.719116, 27391.124237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.120117, 30160.070221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.486084, 30526.533295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.888062, 29231.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.577911, 27009.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26929.326000, 25967.110000, 1085.488031, 610.965618, 126.435528, X, Y)
[Sat Jun 22 12:09:13 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28.gif
[Sat Jun 22 13:36:39 2013] Mean detx,y = (-519.79, -556.35) 
[Sat Jun 22 13:36:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:37:06 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:37:06 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 22 13:37:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Jun 23 12:30:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:30:08 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:34 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:34 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 3000.00
[Sun Jun 23 18:10:34 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_bgd.pi.gz = 0.00
[Sun Jun 23 18:10:34 2013] Got source and background scale factors 1122370.000000, 0.000000
[Sun Jun 23 18:10:34 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 23 18:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:38 2013] Using photon index=1.80, rate=0.00871, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28.arf
[Sun Jun 23 18:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:38 2013] Updating source flux to 3.1e-14
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete