[Thu Jun 20 07:20:26 2013] Detection parameters:
  Position = (280.4, 351.4) = 11 4 43.45 38 13 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 22.1
  Background counts = 163.3
  Rate = 0.004 +/- 0.0006

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 4.06'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Thu Jun 20 07:30:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.669
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.46"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Warning, spatial fit 22 centroid is now closest to src. 13
[Fri Jun 21 10:54:58 2013] Spatial fit model total counts = 2049.340000, observed total counts = 1834.000000
[Fri Jun 21 10:54:58 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:54:59 2013] Source is confused with source 13
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Fri Jun 21 10:56:11 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.669
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.46"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Warning, spatial fit 21 centroid is now closest to src. 13
[Sat Jun 22 12:08:14 2013] Spatial fit model total counts = 2031.160000, observed total counts = 1834.000000
[Sat Jun 22 12:08:14 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:13 2013] XMMSAS src. selection expression = ellipse(24344.486084, 30526.533295, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun 22 12:09:13 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (243, 314) - (318, 389)
[Sat Jun 22 12:09:13 2013] XMMSAS bgd. selection expression = annulus(24344.486084, 30526.533295, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27087.232239, 30420.552490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.542389, 30002.239349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.323059, 32074.425995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24670.120117, 30160.070221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27249.828888, 31721.293823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22972.937775, 32065.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.888062, 29231.022369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25018.850250, 27884.195038, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25.gif
[Sat Jun 22 13:32:35 2013] Mean detx,y = (410.03, -3141.74) 
[Sat Jun 22 13:32:41 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:33:00 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:33:01 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 22 13:33:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jun 23 12:26:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:26:52 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:33 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:33 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 1632.00
[Sun Jun 23 18:10:33 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_bgd.pi.gz = 216.00
[Sun Jun 23 18:10:33 2013] Got source and background scale factors 1032435.000000, 430400.000000
[Sun Jun 23 18:10:33 2013] User source parameters:
  Position = (280.4, 351.4) = 11 4 43.45 38 13 37.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1113.9 +/- 41.4
  Background aperture counts = 518.1
  Rate = 0.03 +/- 0.001

[Sun Jun 23 18:10:33 2013] Updating counts from extracted products
[Sun Jun 23 18:10:33 2013] Set source signif. to 1113.86/22.76 = 48.93
[Sun Jun 23 18:10:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:38 2013] Using photon index=1.80, rate=0.0303, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25.arf
[Sun Jun 23 18:10:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:38 2013] Updating source flux to 1.5e-13
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete