[Thu Jun 20 07:20:25 2013] Detection parameters:
  Position = (349.5, 351.1) = 11 4 17.93 38 13 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 781.9 +/- 47.0
  Background counts = 206.6
  Rate = 0.03 +/- 0.002

[Thu Jun 20 07:20:29 2013] Off-axis axis estimate = 5.32'
[Thu Jun 20 07:30:07 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 07:30:07 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Thu Jun 20 07:30:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.671
[Thu Jun 20 07:30:07 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 9.09"
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 22:52:52 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 20 22:52:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12.csv
[Thu Jun 20 22:52:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 20 22:52:53 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 20 22:52:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 20 22:52:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:58 2013] Warning, spatial fit 12 centroid is now closest to src. 4
[Fri Jun 21 10:54:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:54:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:54:59 2013] Assessing source extent using major
[Fri Jun 21 10:54:59 2013] Source does appear to be extended
[Fri Jun 21 10:54:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:56:11 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 10:56:11 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Fri Jun 21 10:56:11 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.671
[Fri Jun 21 10:56:11 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.09"
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12.csv
[Fri Jun 21 20:03:24 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 21 20:03:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12.csv
[Fri Jun 21 20:03:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 21 20:03:25 2013] fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 21 20:03:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 21 20:03:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:14 2013] Warning, spatial fit 12 centroid is now closest to src. 4
[Sat Jun 22 12:08:14 2013] Spatial fit model total counts = 6237.050000, observed total counts = 7171.000000
[Sat Jun 22 12:08:14 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:14 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:14 2013] Assessing source extent using major
[Sat Jun 22 12:08:14 2013] Source does appear to be extended
[Sat Jun 22 12:08:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 12:09:13 2013] XMMSAS src. selection expression = ellipse(30360.612549, 30497.667816, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing source region out to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 22 12:09:13 2013] Extracting stamp from image fullrun_pn_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (312, 314) - (387, 389)
[Sat Jun 22 12:09:13 2013] XMMSAS bgd. selection expression = annulus(30360.612549, 30497.667816, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.706909, 29260.156006, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(28137.360000, 29370.722860, 2137.339262, 1645.855247, 34.932000, X, Y) && !ellipse(28833.067993, 30246.815338, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29329.205353, 29566.195923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28012.958649, 31140.591125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29822.509796, 28771.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.083832, 27562.179810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28908.457550, 31671.732391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29808.377075, 31288.667419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31108.356415, 29579.471069, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 12:09:13 2013] Writing fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12.gif
[Sat Jun 22 13:16:25 2013] Mean detx,y = (5130.37, 444.83) 
[Sat Jun 22 13:16:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 13:16:55 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 13:16:56 2013] Setting source spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 22 13:16:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Jun 23 12:22:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 12:22:32 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:30 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:30 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 5103.00
[Sun Jun 23 18:10:30 2013] Total counts from fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_bgd.pi.gz = 41.00
[Sun Jun 23 18:10:30 2013] Got source and background scale factors 1059286.000000, 36800.000000
[Sun Jun 23 18:10:30 2013] User source parameters:
  Position = (349.5, 351.1) = 11 4 17.93 38 13 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3922.8 +/- 72.4
  Background aperture counts = 1180.2
  Rate = 0.1 +/- 0.002

[Sun Jun 23 18:10:30 2013] Updating counts from extracted products
[Sun Jun 23 18:10:30 2013] Set source signif. to 3922.82/34.35 = 114.19
[Sun Jun 23 18:10:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:37 2013] Using photon index=1.80, rate=0.107, arf fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12.arf
[Sun Jun 23 18:10:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:37 2013] Updating source flux to 5e-13
[Sun Jun 23 18:11:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:47 2013] xmm0153950601/analysis//spectral/fullrun_pn_xmm0153950601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete