[Thu Jun 20 07:22:10 2013] Detection parameters:
  Position = (324.4, 291.8) = 11 4 27.22 38 9 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.5 +/- 20.7
  Background counts = 59.4
  Rate = 0.006 +/- 0.0006

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 1.94'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jun 21 01:24:43 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.980
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 7.40"
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32.ximg exists
[Fri Jun 21 10:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32.csv
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Jun 21 10:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32.csv
[Fri Jun 21 10:54:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:21 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Jun 21 10:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 21 10:54:21 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Jun 21 10:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32.csv
[Fri Jun 21 10:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 1521.700000, observed total counts = 1314.000000
[Fri Jun 21 10:55:50 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 1990.680000, observed total counts = 1802.000000
[Fri Jun 21 10:55:50 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 81
[Fri Jun 21 10:55:50 2013] Source is confused with source 96
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jun 21 23:33:15 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.980
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.40"
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30.csv
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30.csv
[Sat Jun 22 12:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jun 22 12:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jun 22 12:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Jun 22 12:07:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 1508.600000, observed total counts = 1314.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 1999.220000, observed total counts = 1802.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 828.984000, observed total counts = 1420.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:02 2013] XMMSAS src. selection expression = ellipse(28173.487030, 25334.384552, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 13:58:02 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_src.reg
[Sun Jun 23 13:58:02 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (287, 254) - (362, 329)
[Sun Jun 23 13:58:02 2013] XMMSAS bgd. selection expression = annulus(28173.487030, 25334.384552, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.624000, 26531.200000, 1088.264031, 514.240815, 296.979900, X, Y) && !ellipse(30212.981860, 26395.379680, 1318.280038, 553.782416, 57.780700, X, Y) && !ellipse(31507.612000, 24711.406000, 2912.368084, 503.390414, 54.402100, X, Y) && !ellipse(30913.654000, 25613.622000, 1397.760040, 572.066416, 51.745500, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(32162.508000, 27812.508000, 3071.448088, 1602.304046, 141.233100, X, Y) && !ellipse(26541.794000, 25507.370000, 1088.264031, 1088.264031, 0.000000, X, Y) && !ellipse(27923.585052, 25753.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(29777.224000, 24647.610000, 1326.368038, 1326.368038, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(27951.358260, 24703.741400, 1425.560041, 241.157607, 80.777000, X, Y) && !ellipse(30828.270000, 26958.255400, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(31204.294000, 26769.116000, 1321.048038, 1321.048038, 0.000000, X, Y) && !ellipse(26029.956000, 24898.956000, 1087.088031, 1087.088031, 0.000000, X, Y) && !ellipse(25336.666000, 23883.938000, 2174.176063, 2174.176063, 0.000000, X, Y)
[Sun Jun 23 13:58:02 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90.gif
[Sun Jun 23 14:52:27 2013] Mean detx,y = (-277.63, -3396.28) 
[Sun Jun 23 14:52:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:52:44 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:52:44 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sun Jun 23 14:52:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sun Jun 23 16:34:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 16:34:07 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:55 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:56 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 984.00
[Sun Jun 23 18:10:56 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_bgd.pi.gz = 376.00
[Sun Jun 23 18:10:56 2013] Got source and background scale factors 1178404.000000, 963012.000000
[Sun Jun 23 18:10:56 2013] User source parameters:
  Position = (324.4, 291.8) = 11 4 27.22 38 9 11.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 523.9 +/- 32.4
  Background aperture counts = 460.1
  Rate = 0.01 +/- 0.0008

[Sun Jun 23 18:10:56 2013] Updating counts from extracted products
[Sun Jun 23 18:10:56 2013] Set source signif. to 523.90/21.45 = 24.42
[Sun Jun 23 18:11:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:04 2013] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90.arf
[Sun Jun 23 18:11:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:04 2013] Updating source flux to 1.3e-13
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete