[Thu Jun 20 07:22:04 2013] Detection parameters:
  Position = (312.3, 307.6) = 11 4 31.66 38 10 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 968.2 +/- 40.9
  Background counts = 69.6
  Rate = 0.03 +/- 0.001

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 1.21'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Jun 21 01:24:43 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.116
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.03"
[Fri Jun 21 10:54:17 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 21 10:54:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 10:54:17 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 21 10:54:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 10:54:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 21 10:54:20 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 3881.230000, observed total counts = 3598.000000
[Fri Jun 21 10:55:49 2013] Offset between fit and detection position for source 9 = 4.241083 pixels
[Fri Jun 21 10:55:49 2013] 4066.020000 total counts/ 3049.690000 bgd. counts: snr = 18.403774
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 4.241083 pixels
  Position = (310.4, 303.8) = 11 4 32.39 38 10 1.7
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 1016.3 +/- 63.8
  Background counts = 3049.7
  Rate = 0.03 +/- 0.002
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 2419.210000, observed total counts = 2414.000000
[Fri Jun 21 10:55:49 2013] Offset between fit and detection position for source 9 = 2.051316 pixels
[Fri Jun 21 10:55:49 2013] Warning, changing simple spatial fit ID from 8 to 18
[Fri Jun 21 10:55:49 2013] 2439.835000 total counts/ 1898.940000 bgd. counts: snr = 12.412445
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.051316 pixels
  Position = (311.6, 305.5) = 11 4 31.95 38 10 9.0
  Extent = 13.6 (13.5-27.2)" x 6.4 (5.2-7.9)", rotation angle = 297 (289-303) degrees
  Source counts = 540.9 +/- 49.4
  Background counts = 1898.9
  Rate = 0.01 +/- 0.001
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.71
[Fri Jun 21 10:55:50 2013] Source is asymmetric
[Fri Jun 21 10:55:50 2013] Source is confused with source 19
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 10.02"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.796
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.02"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 12:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 3551.180000, observed total counts = 3109.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.71
[Sat Jun 22 12:08:50 2013] Source is asymmetric
[Sun Jun 23 13:58:01 2013] XMMSAS src. selection expression = ellipse(27056.624000, 26531.200000, 816.198023, 385.680611, 296.979900, X, Y)
[Sun Jun 23 13:58:01 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun 23 13:58:01 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (265, 259) - (358, 352)
[Sun Jun 23 13:58:01 2013] XMMSAS bgd. selection expression = annulus(27056.624000, 26531.200000, 1360.330039, 2720.660078, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(29333.328613, 29988.897827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(30212.981860, 26395.379680, 1318.280038, 553.782416, 57.780700, X, Y) && !ellipse(31507.612000, 24711.406000, 2912.368084, 503.390414, 54.402100, X, Y) && !ellipse(30913.654000, 25613.622000, 1397.760040, 572.066416, 51.745500, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(32162.508000, 27812.508000, 3071.448088, 1602.304046, 141.233100, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(26541.794000, 25507.370000, 1088.264031, 1088.264031, 0.000000, X, Y) && !ellipse(28173.487030, 25334.384552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.585052, 25753.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(29777.224000, 24647.610000, 1326.368038, 1326.368038, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.358260, 24703.741400, 1425.560041, 241.157607, 80.777000, X, Y) && !ellipse(30828.270000, 26958.255400, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(26029.956000, 24898.956000, 1087.088031, 1087.088031, 0.000000, X, Y) && !ellipse(25336.666000, 23883.938000, 2174.176063, 2174.176063, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9.gif
[Sun Jun 23 14:28:22 2013] Mean detx,y = (-130.20, -1752.46) 
[Sun Jun 23 14:28:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:28:37 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:28:37 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 23 14:28:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun 23 18:10:51 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:51 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 1977.00
[Sun Jun 23 18:10:51 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_bgd.pi.gz = 266.00
[Sun Jun 23 18:10:51 2013] Got source and background scale factors 988800.000000, 631328.000000
[Sun Jun 23 18:10:51 2013] User source parameters:
  Position = (311.6, 305.5) = 11 4 31.95 38 10 9.0
  Extent = 13.6 (13.5-27.2)" x 6.4 (5.2-7.9)", rotation angle = 297 (289-303) degrees
  Source aperture counts = 1560.4 +/- 45.5
  Background aperture counts = 416.6
  Rate = 0.04 +/- 0.001

[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 1.7e-13
[Sun Jun 23 18:11:17 2013] Flag p found in src. 9 procflags, skipping spectral fitting
[Sun Jun 23 18:11:17 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete