[Thu Jun 20 07:22:08 2013] Detection parameters:
  Position = (282.1, 334.8) = 11 4 42.80 38 12 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.2 +/- 24.1
  Background counts = 61.9
  Rate = 0.008 +/- 0.0007

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 2.89'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Fri Jun 21 01:24:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.656
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.87"
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 21 10:54:18 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Jun 21 10:54:21 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 21 10:54:21 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 21 10:54:21 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 3770.900000, observed total counts = 3281.000000
[Fri Jun 21 10:55:49 2013] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 1969.340000, observed total counts = 1900.000000
[Fri Jun 21 10:55:50 2013] Offset between fit and detection position for source 62 = 2.887492 pixels
[Fri Jun 21 10:55:50 2013] 1926.712000 total counts/ 1614.340000 bgd. counts: snr = 7.774538
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 2.887492 pixels
  Position = (284.9, 335.5) = 11 4 41.77 38 12 19.6
  Extent = 15.7 (15.4-31.5)" x 4.9 (3.5-12.9)", rotation angle = 348 (343-357) degrees
  Source counts = 312.4 +/- 43.9
  Background counts = 1614.3
  Rate = 0.008 +/- 0.001
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Fri Jun 21 10:55:50 2013] Source is confused with source 6
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.4, npix_max = 33, mask sum = 19, frac = 0.575
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.33"
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27.csv
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27.csv
[Sat Jun 22 12:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jun 22 12:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jun 22 12:07:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 22 12:07:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Warning, spatial fit 27 centroid is now closest to src. 55
[Sat Jun 22 12:08:50 2013] Source 62 is offset by 3.191563 and 0.079611 pixels which is larger than
2 X fitted extent = 0.941991 x 0.941991, not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Sun Jun 23 13:58:02 2013] XMMSAS src. selection expression = ellipse(24740.612000, 29143.800200, 944.844027, 294.598808, 348.237400, X, Y)
[Sun Jun 23 13:58:02 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_src.reg
[Sun Jun 23 13:58:02 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (231, 281) - (339, 390)
[Sun Jun 23 13:58:02 2013] XMMSAS bgd. selection expression = annulus(24740.612000, 29143.800200, 1574.740045, 3149.480091, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.624000, 26531.200000, 1088.264031, 514.240815, 296.979900, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(26541.794000, 25507.370000, 1088.264031, 1088.264031, 0.000000, X, Y) && !ellipse(28173.487030, 25334.384552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.585052, 25753.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.358260, 24703.741400, 1425.560041, 241.157607, 80.777000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25336.666000, 23883.938000, 2174.176063, 2174.176063, 0.000000, X, Y)
[Sun Jun 23 13:58:02 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62.gif
[Sun Jun 23 14:50:12 2013] Mean detx,y = (106.73, 1546.89) 
[Sun Jun 23 14:50:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:50:28 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:50:29 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun Jun 23 14:50:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sun Jun 23 18:10:55 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:55 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 1423.00
[Sun Jun 23 18:10:55 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_bgd.pi.gz = 2121.00
[Sun Jun 23 18:10:55 2013] Got source and background scale factors 838120.000000, 7653488.000000
[Sun Jun 23 18:10:55 2013] User source parameters:
  Position = (284.9, 335.5) = 11 4 41.77 38 12 19.6
  Extent = 15.7 (15.4-31.5)" x 4.9 (3.5-12.9)", rotation angle = 348 (343-357) degrees
  Source aperture counts = 1190.7 +/- 38.7
  Background aperture counts = 232.3
  Rate = 0.03 +/- 0.001

[Sun Jun 23 18:11:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:04 2013] Using photon index=1.80, rate=0.008, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62.arf
[Sun Jun 23 18:11:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:04 2013] Updating source flux to 1.1e-13
[Sun Jun 23 18:11:17 2013] Flag b found in src. 62 procflags, skipping spectral fitting
[Sun Jun 23 18:11:17 2013] Flag p found in src. 62 procflags, skipping spectral fitting
[Sun Jun 23 18:11:17 2013] Flag c found in src. 62 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete