[Thu Jun 20 07:22:04 2013] Detection parameters:
  Position = (292.0, 335.7) = 11 4 39.18 38 12 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 736.7 +/- 35.9
  Background counts = 66.9
  Rate = 0.02 +/- 0.001

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 2.74'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Fri Jun 21 01:24:43 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.903
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.80"
[Fri Jun 21 10:54:17 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 21 10:54:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 21 10:54:17 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 21 10:54:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 21 10:54:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Fri Jun 21 10:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:49 2013] Warning, spatial fit 9 centroid is now closest to src. 62
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 62
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 7.80"
[Fri Jun 21 23:33:15 2013] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.903
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.80"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 12:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 4149.900000, observed total counts = 3281.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:01 2013] XMMSAS src. selection expression = ellipse(25351.817474, 29159.320648, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 23 13:58:01 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (254, 298) - (329, 373)
[Sun Jun 23 13:58:01 2013] XMMSAS bgd. selection expression = annulus(25351.817474, 29159.320648, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.624000, 26531.200000, 1088.264031, 514.240815, 296.979900, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6.gif
[Sun Jun 23 14:28:46 2013] Mean detx,y = (-340.60, 1281.17) 
[Sun Jun 23 14:28:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:29:01 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:29:01 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 23 14:29:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 23 15:33:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:33:29 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:51 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:51 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2513.00
[Sun Jun 23 18:10:51 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_bgd.pi.gz = 286.00
[Sun Jun 23 18:10:51 2013] Got source and background scale factors 1109932.000000, 613232.000000
[Sun Jun 23 18:10:51 2013] User source parameters:
  Position = (292.0, 335.7) = 11 4 39.18 38 12 22.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1995.3 +/- 51.1
  Background aperture counts = 517.7
  Rate = 0.05 +/- 0.001

[Sun Jun 23 18:10:51 2013] Updating counts from extracted products
[Sun Jun 23 18:10:51 2013] Set source signif. to 1995.35/22.75 = 87.70
[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=0.0511, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 5.4e-13
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete