[Thu Jun 20 07:22:08 2013] Detection parameters:
  Position = (281.8, 347.2) = 11 4 42.91 38 13 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.7 +/- 17.5
  Background counts = 57.2
  Rate = 0.004 +/- 0.0005

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 3.73'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 8.29"
[Fri Jun 21 01:24:43 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 8.29"
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50.csv
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50.csv
[Fri Jun 21 10:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:21 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jun 21 10:54:22 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50.csv
[Fri Jun 21 10:54:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:50 2013] Warning, spatial fit 50 centroid is now closest to src. 55
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 8.29"
[Fri Jun 21 23:33:15 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 8.29"
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 22 12:07:55 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src47 appears to have run properly
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 22 12:07:57 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 22 12:07:57 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Jun 22 12:08:50 2013] Warning, spatial fit 47 centroid is now closest to src. 48
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:02 2013] XMMSAS src. selection expression = ellipse(24472.102722, 30154.316772, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 13:58:02 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_src.reg
[Sun Jun 23 13:58:02 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (244, 310) - (319, 385)
[Sun Jun 23 13:58:02 2013] XMMSAS bgd. selection expression = annulus(24472.102722, 30154.316772, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 13:58:02 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53.gif
[Sun Jun 23 15:02:10 2013] Mean detx,y = (-108.65, 2593.68) 
[Sun Jun 23 15:02:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:02:22 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:02:22 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Jun 23 15:02:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun Jun 23 16:57:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 16:57:10 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:59 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:59 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 802.00
[Sun Jun 23 18:10:59 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_bgd.pi.gz = 923.00
[Sun Jun 23 18:10:59 2013] Got source and background scale factors 1168160.000000, 2927136.000000
[Sun Jun 23 18:10:59 2013] User source parameters:
  Position = (281.8, 347.2) = 11 4 42.91 38 13 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 433.6 +/- 29.3
  Background aperture counts = 368.4
  Rate = 0.01 +/- 0.0008

[Sun Jun 23 18:10:59 2013] Updating counts from extracted products
[Sun Jun 23 18:10:59 2013] Set source signif. to 433.65/19.19 = 22.59
[Sun Jun 23 18:11:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:05 2013] Using photon index=1.80, rate=0.0111, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53.arf
[Sun Jun 23 18:11:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:05 2013] Updating source flux to 1.2e-13
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete