[Thu Jun 20 07:22:07 2013] Detection parameters:
  Position = (264.3, 369.2) = 11 4 49.41 38 14 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 14.0
  Background counts = 34.1
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 5.69'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.902
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.28"
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55.csv
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55.csv
[Fri Jun 21 10:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:22 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri Jun 21 10:54:22 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri Jun 21 10:54:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 445.590000, observed total counts = 399.000000
[Fri Jun 21 10:55:50 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.902
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 9.28"
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52.csv
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Jun 22 12:07:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52.csv
[Sat Jun 22 12:07:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 22 12:07:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.260308 pixels away
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 448.916000, observed total counts = 399.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:03 2013] XMMSAS src. selection expression = ellipse(22941.757111, 32067.629120, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_src.reg
[Sun Jun 23 13:58:03 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (227, 332) - (302, 407)
[Sun Jun 23 13:58:03 2013] XMMSAS bgd. selection expression = annulus(22941.757111, 32067.629120, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.474701, 34393.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.728000, 35128.412000, 1700.128049, 1700.128049, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42.gif
[Sun Jun 23 15:04:03 2013] Mean detx,y = (3.06, 5053.46) 
[Sun Jun 23 15:04:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:04:24 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:04:24 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Jun 23 15:04:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Jun 23 17:05:21 2013] Not generating rmf since there are only 96 counts
[Sun Jun 23 17:05:21 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:11:00 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:11:00 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 299.00
[Sun Jun 23 18:11:00 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_bgd.pi.gz = 1077.00
[Sun Jun 23 18:11:00 2013] Got source and background scale factors 1154016.000000, 6304773.000000
[Sun Jun 23 18:11:00 2013] User source parameters:
  Position = (264.3, 369.2) = 11 4 49.41 38 14 46.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.9 +/- 18.3
  Background aperture counts = 197.1
  Rate = 0.003 +/- 0.0005

[Sun Jun 23 18:11:00 2013] Updating counts from extracted products
[Sun Jun 23 18:11:00 2013] Set source signif. to 101.87/14.04 = 7.26
[Sun Jun 23 18:11:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:05 2013] Using photon index=1.80, rate=0.00261, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42.arf
[Sun Jun 23 18:11:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:05 2013] Updating source flux to 3.6e-14
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete