[Thu Jun 20 07:22:06 2013] Detection parameters:
  Position = (274.2, 404.2) = 11 4 45.74 38 17 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.7 +/- 11.3
  Background counts = 18.2
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 7.87'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.843
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 10.36"
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59.csv
[Fri Jun 21 10:54:19 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59_1.ximg exists
[Fri Jun 21 10:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59.csv
[Fri Jun 21 10:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:22 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jun 21 10:54:22 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Fri Jun 21 10:54:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59.csv
[Fri Jun 21 10:54:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 541.688000, observed total counts = 520.000000
[Fri Jun 21 10:55:50 2013] Offset between fit and detection position for source 37 = 0.483269 pixels
[Fri Jun 21 10:55:50 2013] Warning, changing simple spatial fit ID from 59 to 45
[Fri Jun 21 10:55:50 2013] 548.559700 total counts/ 43.263700 bgd. counts: snr = 76.821721
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.483269 pixels
  Position = (273.7, 404.3) = 11 4 45.92 38 17 18.6
  Extent = 21.1 (21.1-21.1)", rotation angle = 0
  Source counts = 505.3 +/- 23.4
  Background counts = 43.3
  Rate = 0.01 +/- 0.0006
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 11
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 21.09"
[Fri Jun 21 23:33:15 2013] source mask rpix=4.8, npix_max = 114, mask sum = 84, frac = 0.734
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 21.09"
[Sat Jun 22 12:07:55 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sat Jun 22 12:07:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 545.940000, observed total counts = 520.000000
[Sat Jun 22 12:08:50 2013] Offset between fit and detection position for source 37 = 0.144480 pixels
[Sat Jun 22 12:08:50 2013] Warning, changing simple spatial fit ID from 56 to 42
[Sat Jun 22 12:08:50 2013] 553.744000 total counts/ 10.110000 bgd. counts: snr = 170.974378
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.144480 pixels
  Position = (273.6, 404.3) = 11 4 45.97 38 17 18.8
  Extent = 21.3 (21.2-42.5)", rotation angle = 0
  Source counts = 543.6 +/- 23.5
  Background counts = 10.1
  Rate = 0.01 +/- 0.0006
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:03 2013] XMMSAS src. selection expression = ellipse(23753.728000, 35128.412000, 1275.096037, 1275.096037, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_src.reg
[Sun Jun 23 13:58:03 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (200, 331) - (347, 478)
[Sun Jun 23 13:58:03 2013] XMMSAS bgd. selection expression = annulus(23753.728000, 35128.412000, 2125.160061, 4250.320122, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(24433.474701, 34393.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(22960.597000, 36178.574800, 602.277617, 425.232812, 359.892049, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(22392.109000, 37162.798200, 2218.192064, 468.621613, 51.713400, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.360000, 37318.204000, 1779.528051, 1381.368040, 44.996000, X, Y) && !ellipse(21654.464500, 38159.219200, 2398.944069, 553.889616, 54.560000, X, Y) && !ellipse(20620.122000, 39602.820000, 1973.624057, 566.703216, 53.452200, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19436.963800, 41178.349400, 2140.128062, 557.844016, 54.926800, X, Y) && !ellipse(20181.334000, 40160.985200, 2578.616074, 558.290416, 50.666200, X, Y) && !ellipse(19558.796600, 40990.860200, 2692.296077, 596.755217, 54.950200, X, Y) && !ellipse(20922.243591, 39182.818237, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37.gif
[Sun Jun 23 15:06:25 2013] Mean detx,y = (-2535.87, 6846.93) 
[Sun Jun 23 15:06:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:07:14 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:07:14 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jun 23 15:07:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jun 23 18:11:01 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:11:01 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 1079.00
[Sun Jun 23 18:11:01 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1814.00
[Sun Jun 23 18:11:01 2013] Got source and background scale factors 4090896.000000, 21166823.000000
[Sun Jun 23 18:11:01 2013] User source parameters:
  Position = (273.6, 404.3) = 11 4 45.97 38 17 18.8
  Extent = 21.3 (21.2-42.5)", rotation angle = 0
  Source aperture counts = 728.4 +/- 33.9
  Background aperture counts = 350.6
  Rate = 0.02 +/- 0.0009

[Sun Jun 23 18:11:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:05 2013] Using photon index=1.80, rate=0.0139, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37.arf
[Sun Jun 23 18:11:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:05 2013] Updating source flux to 2.1e-13
[Sun Jun 23 18:11:17 2013] Flag c found in src. 37 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete