[Thu Jun 20 07:22:05 2013] Detection parameters:
  Position = (211.7, 490.8) = 11 5 8.88 38 23 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.1 +/- 16.1
  Background counts = 13.7
  Rate = 0.002 +/- 0.0004

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 15.30'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Fri Jun 21 01:24:43 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.878
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 14.08"
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97.csv
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97_1.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97.csv
[Fri Jun 21 10:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:23 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Fri Jun 21 10:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97.csv
[Fri Jun 21 10:54:23 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Fri Jun 21 10:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97.csv
[Fri Jun 21 10:54:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 450.643000, observed total counts = 440.000000
[Fri Jun 21 10:55:50 2013] Offset between fit and detection position for source 21 = 0.340232 pixels
[Fri Jun 21 10:55:50 2013] Warning, changing simple spatial fit ID from 97 to 63
[Fri Jun 21 10:55:50 2013] 441.358200 total counts/ 12.886200 bgd. counts: snr = 119.360331
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.340232 pixels
  Position = (211.4, 490.6) = 11 5 8.99 38 23 34.0
  Extent = 25.3 (25.3-25.4)", rotation angle = 0
  Source counts = 428.5 +/- 21.0
  Background counts = 12.9
  Rate = 0.01 +/- 0.0005
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 20
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 25.34"
[Fri Jun 21 23:33:15 2013] source mask rpix=5.8, npix_max = 160, mask sum = 132, frac = 0.825
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 25.34"
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Jun 22 12:07:58 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Sat Jun 22 12:07:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Jun 22 12:07:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 454.402000, observed total counts = 440.000000
[Sat Jun 22 12:08:50 2013] Offset between fit and detection position for source 21 = 0.488309 pixels
[Sat Jun 22 12:08:50 2013] Warning, changing simple spatial fit ID from 75 to 59
[Sat Jun 22 12:08:50 2013] 446.248579 total counts/ 0.003579 bgd. counts: snr = 7459.194079
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.488309 pixels
  Position = (210.9, 490.7) = 11 5 9.17 38 23 34.3
  Extent = 26.9 (26.6-27.0)", rotation angle = 0
  Source counts = 446.2 +/- 21.1
  Background counts = 0.0
  Rate = 0.01 +/- 0.0005
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:03 2013] XMMSAS src. selection expression = ellipse(18302.128000, 42642.852000, 1612.158046, 1612.158046, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_src.reg
[Sun Jun 23 13:58:03 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (118, 398) - (304, 583)
[Sun Jun 23 13:58:03 2013] XMMSAS bgd. selection expression = annulus(18302.128000, 42642.852000, 2686.930077, 5373.860155, X, Y) && !ellipse(22392.109000, 37162.798200, 2218.192064, 468.621613, 51.713400, X, Y) && !ellipse(22244.360000, 37318.204000, 1779.528051, 1381.368040, 44.996000, X, Y) && !ellipse(21654.464500, 38159.219200, 2398.944069, 553.889616, 54.560000, X, Y) && !ellipse(20620.122000, 39602.820000, 1973.624057, 566.703216, 53.452200, X, Y) && !ellipse(19436.963800, 41178.349400, 2140.128062, 557.844016, 54.926800, X, Y) && !ellipse(20181.334000, 40160.985200, 2578.616074, 558.290416, 50.666200, X, Y) && !ellipse(19558.796600, 40990.860200, 2692.296077, 596.755217, 54.950200, X, Y) && !ellipse(18553.084000, 42419.368000, 2608.824075, 2608.824075, 0.000000, X, Y) && !ellipse(20922.243591, 39182.818237, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 13:58:03 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21.gif
[Sun Jun 23 15:14:55 2013] Mean detx,y = (-2431.89, 15765.00) 
[Sun Jun 23 15:14:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:15:53 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:15:53 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Jun 23 15:15:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Jun 23 18:11:03 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:11:03 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 515.00
[Sun Jun 23 18:11:03 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1148.00
[Sun Jun 23 18:11:03 2013] Got source and background scale factors 4436928.000000, 20674659.000000
[Sun Jun 23 18:11:03 2013] User source parameters:
  Position = (210.9, 490.7) = 11 5 9.17 38 23 34.3
  Extent = 26.9 (26.6-27.0)", rotation angle = 0
  Source aperture counts = 268.6 +/- 23.7
  Background aperture counts = 246.4
  Rate = 0.007 +/- 0.0006

[Sun Jun 23 18:11:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:05 2013] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21.arf
[Sun Jun 23 18:11:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:05 2013] Updating source flux to 3.9e-13
[Sun Jun 23 18:11:17 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete