[Thu Jun 20 07:22:04 2013] Detection parameters:
  Position = (337.7, 345.3) = 11 4 22.29 38 12 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2549.8 +/- 68.5
  Background counts = 49.5
  Rate = 0.08 +/- 0.002

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 4.43'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.727
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.64"
[Fri Jun 21 10:54:16 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 21 10:54:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 10:54:16 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 21 10:54:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 10:54:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 21 10:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 10:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:49 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.193921 pixels away
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 3
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.727
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.64"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2.csv
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2.csv
[Sat Jun 22 12:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.274306 pixels away
[Sat Jun 22 12:08:50 2013] Source 2 is offset by 0.622099 and -3.642485 pixels which is larger than
2 X fitted extent = 1.012510 x 1.012510, not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:00 2013] Counts = 2549.838135, rescaling region sizes by 2.000000
[Sun Jun 23 13:58:00 2013] XMMSAS src. selection expression = ellipse(29333.328613, 29988.897827, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 13:58:00 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 23 13:58:00 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (263, 270) - (413, 420)
[Sun Jun 23 13:58:00 2013] XMMSAS bgd. selection expression = annulus(29333.328613, 29988.897827, 4350.000000, 8700.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(28988.650055, 30502.614136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.624000, 26531.200000, 1088.264031, 514.240815, 296.979900, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(24433.474701, 34393.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30212.981860, 26395.379680, 1318.280038, 553.782416, 57.780700, X, Y) && !ellipse(31507.612000, 24711.406000, 2912.368084, 503.390414, 54.402100, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(30913.654000, 25613.622000, 1397.760040, 572.066416, 51.745500, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(22960.597000, 36178.574800, 602.277617, 425.232812, 359.892049, X, Y) && !ellipse(31784.762000, 24366.818000, 1394.320040, 182.022405, 56.435700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(32162.508000, 27812.508000, 3071.448088, 1602.304046, 141.233100, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(33630.619180, 30943.811600, 371.556011, 371.556011, 0.000000, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(22392.109000, 37162.798200, 2218.192064, 468.621613, 51.713400, X, Y) && !ellipse(26541.794000, 25507.370000, 1088.264031, 1088.264031, 0.000000, X, Y) && !ellipse(28173.487030, 25334.384552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.585052, 25753.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31652.600250, 29196.414062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38424.273712, 30930.915497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.360000, 37318.204000, 1779.528051, 1381.368040, 44.996000, X, Y) && !ellipse(21654.464500, 38159.219200, 2398.944069, 553.889616, 54.560000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(29777.224000, 24647.610000, 1326.368038, 1326.368038, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(20620.122000, 39602.820000, 1973.624057, 566.703216, 53.452200, X, Y) && !ellipse(32807.771637, 28138.039734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.358260, 24703.741400, 1425.560041, 241.157607, 80.777000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30828.270000, 26958.255400, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(31204.294000, 26769.116000, 1321.048038, 1321.048038, 0.000000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.494000, 29736.646000, 1469.168042, 1469.168042, 0.000000, X, Y) && !ellipse(37279.191437, 39117.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.728000, 35128.412000, 1700.128049, 1700.128049, 0.000000, X, Y) && !ellipse(20181.334000, 40160.985200, 2578.616074, 558.290416, 50.666200, X, Y) && !ellipse(19558.796600, 40990.860200, 2692.296077, 596.755217, 54.950200, X, Y) && !ellipse(20922.243591, 39182.818237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32717.380000, 25635.386000, 1456.184042, 1456.184042, 0.000000, X, Y) && !ellipse(26029.956000, 24898.956000, 1087.088031, 1087.088031, 0.000000, X, Y) && !ellipse(25336.666000, 23883.938000, 2174.176063, 2174.176063, 0.000000, X, Y) && !ellipse(33747.960000, 29299.690000, 1544.992044, 1544.992044, 0.000000, X, Y)
[Sun Jun 23 13:58:00 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2.gif
[Sun Jun 23 14:08:04 2013] Mean detx,y = (-3022.23, -253.02) 
[Sun Jun 23 14:08:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:10:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:10:09 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 23 14:10:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 23 15:20:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:20:05 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:49 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:49 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 226731.00
[Sun Jun 23 18:10:49 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 13013.00
[Sun Jun 23 18:10:49 2013] Got source and background scale factors 5251168.000000, 105482632.000000
[Sun Jun 23 18:10:49 2013] User source parameters:
  Position = (337.7, 345.3) = 11 4 22.29 38 12 59.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 226083.2 +/- 477.2
  Background aperture counts = 647.8
  Rate = 6 +/- 0.01

[Sun Jun 23 18:10:49 2013] Updating counts from extracted products
[Sun Jun 23 18:10:49 2013] Set source signif. to 226083.18/25.45 = 8882.64
[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=5.79, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 6.1e-11
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete