[Thu Jun 20 07:22:05 2013] Detection parameters:
  Position = (359.9, 288.1) = 11 4 14.11 38 8 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.4 +/- 26.5
  Background counts = 39.4
  Rate = 0.01 +/- 0.0008

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 4.52'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.002
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 8.69"
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 21 10:54:18 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src15 appears to have run properly
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 21 10:54:20 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 1638.690000, observed total counts = 1639.000000
[Fri Jun 21 10:55:49 2013] Offset between fit and detection position for source 17 = 2.651806 pixels
[Fri Jun 21 10:55:49 2013] 1621.867000 total counts/ 1110.280000 bgd. counts: snr = 15.353353
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.651806 pixels
  Position = (361.7, 286.1) = 11 4 13.46 38 8 44.3
  Extent = 17.4 (17.3-34.8)" x 5.8 (4.9-6.6)", rotation angle = 52 (49-55) degrees
  Source counts = 511.6 +/- 40.3
  Background counts = 1110.3
  Rate = 0.01 +/- 0.001
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 1162.980000, observed total counts = 1097.000000
[Fri Jun 21 10:55:49 2013] Offset between fit and detection position for source 17 = 2.543617 pixels
[Fri Jun 21 10:55:49 2013] Warning, changing simple spatial fit ID from 15 to 21
[Fri Jun 21 10:55:49 2013] 1177.582000 total counts/ 722.079000 bgd. counts: snr = 16.951139
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.543617 pixels
  Position = (363.0, 283.9) = 11 4 12.98 38 8 34.8
  Extent = 17.9 (17.4-35.7)" x 5.9 (4.9-6.8)", rotation angle = 53 (49-56) degrees
  Source counts = 455.5 +/- 34.3
  Background counts = 722.1
  Rate = 0.01 +/- 0.0009
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.57
[Fri Jun 21 10:55:50 2013] Source is asymmetric
[Fri Jun 21 10:55:50 2013] Source is confused with source 94
[Fri Jun 21 10:55:50 2013] Source is confused with source 89
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.90"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src14.ximg exists
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Jun 22 12:07:54 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src14 appears to have run properly
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Source 17 is offset by 1.335329 and -5.364556 pixels which is larger than
2 X fitted extent = 1.734340 x 1.734340, not incorporating fit results
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 1487.250000, observed total counts = 1431.000000
[Sat Jun 22 12:08:50 2013] Offset between fit and detection position for source 17 = 1.834846 pixels
[Sat Jun 22 12:08:50 2013] 1445.842000 total counts/ 770.033000 bgd. counts: snr = 24.353944
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.834846 pixels
  Position = (362.0, 285.4) = 11 4 13.37 38 8 41.4
  Extent = 23.8 (23.2-47.6)" x 6.6 (5.7-7.4)", rotation angle = 55 (52-58) degrees
  Source counts = 675.8 +/- 38.0
  Background counts = 770.0
  Rate = 0.02 +/- 0.001
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 1155.310000, observed total counts = 1097.000000
[Sat Jun 22 12:08:50 2013] Offset between fit and detection position for source 17 = 1.444397 pixels
[Sat Jun 22 12:08:50 2013] Warning, changing simple spatial fit ID from 14 to 20
[Sat Jun 22 12:08:50 2013] 1092.573000 total counts/ 665.146000 bgd. counts: snr = 16.573089
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.444397 pixels
  Position = (362.8, 284.2) = 11 4 13.05 38 8 36.3
  Extent = 17.9 (17.4-35.7)" x 5.5 (4.2-6.5)", rotation angle = 51 (48-55) degrees
  Source counts = 427.4 +/- 33.1
  Background counts = 665.1
  Rate = 0.01 +/- 0.0008
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 3247.070000, observed total counts = 3097.000000
[Sat Jun 22 12:08:50 2013] Offset between fit and detection position for source 17 = 0.367059 pixels
[Sat Jun 22 12:08:50 2013] Warning, changing simple spatial fit ID from 20 to 67
[Sat Jun 22 12:08:50 2013] 3071.836000 total counts/ 2586.220000 bgd. counts: snr = 9.549052
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.367059 pixels
  Position = (362.7, 284.6) = 11 4 13.09 38 8 37.8
  Extent = 36.4 (30.1-72.8)" x 6.3 (5.1-7.2)", rotation angle = 54 (51-58) degrees
  Source counts = 485.6 +/- 55.4
  Background counts = 2586.2
  Rate = 0.01 +/- 0.001
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.17
[Sat Jun 22 12:08:50 2013] Source is asymmetric
[Sun Jun 23 13:58:01 2013] XMMSAS src. selection expression = ellipse(31507.612000, 24711.406000, 2184.276063, 377.542811, 54.402100, X, Y)
[Sun Jun 23 13:58:01 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 23 13:58:01 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (237, 159) - (488, 410)
[Sun Jun 23 13:58:01 2013] XMMSAS bgd. selection expression = annulus(31507.612000, 24711.406000, 3640.460105, 7280.920210, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(29333.328613, 29988.897827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(28988.650055, 30502.614136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27056.624000, 26531.200000, 1088.264031, 514.240815, 296.979900, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(30212.981860, 26395.379680, 1318.280038, 553.782416, 57.780700, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(30913.654000, 25613.622000, 1397.760040, 572.066416, 51.745500, X, Y) && !ellipse(26780.002000, 25912.170000, 1390.712040, 563.378416, 117.464000, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(31784.762000, 24366.818000, 1394.320040, 182.022405, 56.435700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(32162.508000, 27812.508000, 3071.448088, 1602.304046, 141.233100, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(33630.619180, 30943.811600, 371.556011, 371.556011, 0.000000, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(26541.794000, 25507.370000, 1088.264031, 1088.264031, 0.000000, X, Y) && !ellipse(28173.487030, 25334.384552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.585052, 25753.409241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31652.600250, 29196.414062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38424.273712, 30930.915497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.356000, 26322.630000, 1076.984031, 701.708020, 128.044000, X, Y) && !ellipse(29777.224000, 24647.610000, 1326.368038, 1326.368038, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(32807.771637, 28138.039734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27951.358260, 24703.741400, 1425.560041, 241.157607, 80.777000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30828.270000, 26958.255400, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(31204.294000, 26769.116000, 1321.048038, 1321.048038, 0.000000, X, Y) && !ellipse(32150.494000, 29736.646000, 1469.168042, 1469.168042, 0.000000, X, Y) && !ellipse(32717.380000, 25635.386000, 1456.184042, 1456.184042, 0.000000, X, Y) && !ellipse(26029.956000, 24898.956000, 1087.088031, 1087.088031, 0.000000, X, Y) && !ellipse(25336.666000, 23883.938000, 2174.176063, 2174.176063, 0.000000, X, Y) && !ellipse(33747.960000, 29299.690000, 1544.992044, 1544.992044, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17.gif
[Sun Jun 23 14:30:26 2013] Mean detx,y = (-2793.26, -5824.61) 
[Sun Jun 23 14:30:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:31:29 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:31:29 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 23 14:31:29 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 23 18:10:52 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:52 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1193.00
[Sun Jun 23 18:10:52 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_bgd.pi.gz = 6574.00
[Sun Jun 23 18:10:52 2013] Got source and background scale factors 2523652.000000, 69837592.000000
[Sun Jun 23 18:10:52 2013] User source parameters:
  Position = (362.7, 284.6) = 11 4 13.09 38 8 37.8
  Extent = 36.4 (30.1-72.8)" x 6.3 (5.1-7.2)", rotation angle = 54 (51-58) degrees
  Source aperture counts = 955.4 +/- 35.6
  Background aperture counts = 237.6
  Rate = 0.02 +/- 0.0009

[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=0.0124, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 1.5e-13
[Sun Jun 23 18:11:17 2013] Flag b found in src. 17 procflags, skipping spectral fitting
[Sun Jun 23 18:11:17 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete