[Thu Jun 20 07:22:04 2013] Detection parameters:
  Position = (281.4, 395.9) = 11 4 43.08 38 16 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 413.0 +/- 25.5
  Background counts = 25.0
  Rate = 0.02 +/- 0.0009

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 7.17'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.923
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.01"
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 21 10:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11.csv
[Fri Jun 21 10:54:18 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 21 10:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11.csv
[Fri Jun 21 10:54:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 21 10:54:20 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun 21 10:55:49 2013] Warning, spatial fit 11 centroid is now closest to src. 12
[Fri Jun 21 10:55:50 2013] Spatial fit model total counts = 630.934000, observed total counts = 436.000000
[Fri Jun 21 10:55:50 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:50 2013] Source is confused with source 37
[Fri Jun 21 23:33:15 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 10.01"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.923
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.01"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 12:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Spatial fit model total counts = 1219.050000, observed total counts = 1001.000000
[Sat Jun 22 12:08:50 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:50 2013] Source 11 is offset by -4.920015 and 2.338932 pixels which is larger than
2 X fitted extent = 1.538713 x 1.538713, not incorporating fit results
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 13:58:01 2013] XMMSAS src. selection expression = ellipse(24433.474701, 34393.679047, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_src.reg
[Sun Jun 23 13:58:01 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (244, 358) - (319, 433)
[Sun Jun 23 13:58:01 2013] XMMSAS bgd. selection expression = annulus(24433.474701, 34393.679047, 1087.500000, 2175.000000, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(27958.457520, 31493.004000, 1449.904042, 226.704807, 90.000000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(22960.597000, 36178.574800, 602.277617, 425.232812, 359.892049, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(22392.109000, 37162.798200, 2218.192064, 468.621613, 51.713400, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22244.360000, 37318.204000, 1779.528051, 1381.368040, 44.996000, X, Y) && !ellipse(21654.464500, 38159.219200, 2398.944069, 553.889616, 54.560000, X, Y) && !ellipse(22941.757111, 32067.629120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.728000, 35128.412000, 1700.128049, 1700.128049, 0.000000, X, Y)
[Sun Jun 23 13:58:01 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11.gif
[Sun Jun 23 14:29:33 2013] Mean detx,y = (-2586.42, 5953.84) 
[Sun Jun 23 14:29:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:29:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:29:52 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jun 23 14:29:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Jun 23 15:37:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:37:52 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:52 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:52 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 783.00
[Sun Jun 23 18:10:52 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 365.00
[Sun Jun 23 18:10:52 2013] Got source and background scale factors 1112504.000000, 2961362.000000
[Sun Jun 23 18:10:52 2013] User source parameters:
  Position = (281.4, 395.9) = 11 4 43.08 38 16 43.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 645.9 +/- 29.0
  Background aperture counts = 137.1
  Rate = 0.02 +/- 0.0007

[Sun Jun 23 18:10:52 2013] Updating counts from extracted products
[Sun Jun 23 18:10:52 2013] Set source signif. to 645.88/11.71 = 55.16
[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=0.0165, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 2.5e-13
[Sun Jun 23 18:11:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete