[Thu Jun 20 07:22:04 2013] Detection parameters:
  Position = (322.4, 360.7) = 11 4 27.94 38 14 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1262.9 +/- 50.3
  Background counts = 39.7
  Rate = 0.04 +/- 0.002

[Thu Jun 20 07:22:10 2013] Off-axis axis estimate = 4.84'
[Fri Jun 21 01:24:43 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 01:24:43 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Fri Jun 21 01:24:43 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.701
[Fri Jun 21 01:24:43 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.85"
[Fri Jun 21 10:54:16 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 21 10:54:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6.csv
[Fri Jun 21 10:54:16 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 21 10:54:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6.csv
[Fri Jun 21 10:54:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 21 10:54:20 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 21 10:54:20 2013] Fit fullrun_mos2_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 21 10:55:49 2013] Warning, spatial fit 6 centroid is now closest to src. 44
[Fri Jun 21 10:55:49 2013] Spatial fit model total counts = 1475.910000, observed total counts = 1482.000000
[Fri Jun 21 10:55:49 2013] Offset between fit and detection position for source 10 = 1.886325 pixels
[Fri Jun 21 10:55:49 2013] Warning, changing simple spatial fit ID from 6 to 22
[Fri Jun 21 10:55:49 2013] 1490.499000 total counts/ 736.583000 bgd. counts: snr = 27.778713
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.886325 pixels
  Position = (321.9, 362.5) = 11 4 28.12 38 14 17.1
  Extent = 18.1 (18.1-36.2)" x 2.8 (2.6-3.1)", rotation angle = 90
  Source counts = 753.9 +/- 38.6
  Background counts = 736.6
  Rate = 0.02 +/- 0.001
[Fri Jun 21 10:55:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:50 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 10:55:50 2013] Source does appear to be extended
[Fri Jun 21 10:55:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.82
[Fri Jun 21 10:55:50 2013] Source is asymmetric
[Fri Jun 21 10:55:50 2013] Source is confused with source 5
[Fri Jun 21 23:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 21 23:33:15 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Fri Jun 21 23:33:15 2013] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.591
[Fri Jun 21 23:33:15 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.48"
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6.csv
[Sat Jun 22 12:07:54 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 22 12:07:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6.csv
[Sat Jun 22 12:07:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 22 12:07:56 2013] fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 22 12:07:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 22 12:07:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:50 2013] Warning, spatial fit 6 centroid is now closest to src. 5
[Sat Jun 22 12:08:50 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:50 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:50 2013] Source does appear to be extended
[Sat Jun 22 12:08:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 5.82
[Sat Jun 22 12:08:50 2013] Source is asymmetric
[Sun Jun 23 13:58:00 2013] XMMSAS src. selection expression = ellipse(27958.457520, 31493.004000, 1087.428031, 170.028605, 90.000000, X, Y)
[Sun Jun 23 13:58:00 2013] Writing source region out to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 23 13:58:00 2013] Extracting stamp from image fullrun_mos2_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (259, 300) - (384, 425)
[Sun Jun 23 13:58:00 2013] XMMSAS bgd. selection expression = annulus(27958.457520, 31493.004000, 1812.380052, 3624.760104, X, Y) && !ellipse(28094.894600, 29336.794800, 4094.304118, 3846.168111, 18.966800, X, Y) && !ellipse(29333.328613, 29988.897827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28735.097800, 30901.472000, 4170.456120, 4170.456120, 0.000000, X, Y) && !ellipse(28988.650055, 30502.614136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.956390, 27581.195129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26007.105255, 28286.885986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.817474, 29159.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.850000, 27550.300000, 1725.960050, 475.110414, 157.496000, X, Y) && !ellipse(24433.474701, 34393.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25313.560600, 33207.412400, 1502.512043, 404.977612, 54.475400, X, Y) && !ellipse(25781.180600, 32560.057260, 1875.848054, 413.220012, 52.467700, X, Y) && !ellipse(28021.229400, 32019.292000, 1399.584040, 1399.584040, 0.000000, X, Y) && !ellipse(32162.508000, 27812.508000, 3071.448088, 1602.304046, 141.233100, X, Y) && !ellipse(28732.412200, 31715.206000, 1409.416041, 909.144026, 99.012060, X, Y) && !ellipse(26417.671021, 31708.154083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.549400, 32280.760000, 1416.200041, 1416.200041, 0.000000, X, Y) && !ellipse(24740.612000, 29143.800200, 1259.792036, 392.798411, 348.237400, X, Y) && !ellipse(22392.109000, 37162.798200, 2218.192064, 468.621613, 51.713400, X, Y) && !ellipse(31652.600250, 29196.414062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24429.704559, 31956.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.644000, 25518.534000, 2652.736076, 331.592010, 272.131000, X, Y) && !ellipse(23971.111969, 29683.606628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24472.102722, 30154.316772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30828.270000, 26958.255400, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(31204.294000, 26769.116000, 1321.048038, 1321.048038, 0.000000, X, Y) && !ellipse(32150.494000, 29736.646000, 1469.168042, 1469.168042, 0.000000, X, Y) && !ellipse(23753.728000, 35128.412000, 1700.128049, 1700.128049, 0.000000, X, Y)
[Sun Jun 23 13:58:00 2013] Writing fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10.gif
[Sun Jun 23 14:25:22 2013] Mean detx,y = (-3471.83, 1266.27) 
[Sun Jun 23 14:25:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:25:42 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:25:43 2013] Setting source spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 23 14:25:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 23 18:10:50 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:50 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 3757.00
[Sun Jun 23 18:10:50 2013] Total counts from fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 143.00
[Sun Jun 23 18:10:50 2013] Got source and background scale factors 536648.000000, 704552.000000
[Sun Jun 23 18:10:50 2013] User source parameters:
  Position = (321.9, 362.5) = 11 4 28.12 38 14 17.1
  Extent = 18.1 (18.1-36.2)" x 2.8 (2.6-3.1)", rotation angle = 90
  Source aperture counts = 3648.1 +/- 62.3
  Background aperture counts = 108.9
  Rate = 0.09 +/- 0.002

[Sun Jun 23 18:11:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:11:03 2013] Using photon index=1.80, rate=0.0193, arf fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10.arf
[Sun Jun 23 18:11:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:11:03 2013] Updating source flux to 3.1e-13
[Sun Jun 23 18:11:17 2013] Flag c found in src. 10 procflags, skipping spectral fitting
[Sun Jun 23 18:11:43 2013] xmm0153950601/analysis//spectral/fullrun_mos2_xmm0153950601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete