[Thu Jun 20 07:21:05 2013] Detection parameters:
  Position = (268.3, 221.9) = 11 4 47.87 38 4 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.4 +/- 11.1
  Background counts = 13.7
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 07:21:06 2013] Off-axis axis estimate = 5.96'
[Thu Jun 20 22:52:55 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:52:55 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Thu Jun 20 22:52:55 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Thu Jun 20 22:52:55 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.41"
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 21 01:24:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10.csv
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 21 01:24:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10.csv
[Fri Jun 21 01:24:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 21 01:24:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 21 01:24:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 21 01:24:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:16 2013] Source 36 is offset by -5.706356 and -6.221533 pixels which is larger than
2 X fitted extent = 1.087053 x 1.087053, not incorporating fit results
[Fri Jun 21 10:55:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:16 2013] Assessing source extent using major
[Fri Jun 21 10:55:16 2013] Source does appear to be extended
[Fri Jun 21 10:55:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 20:03:26 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:03:26 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Fri Jun 21 20:03:26 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.057
[Fri Jun 21 20:03:26 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.41"
[Fri Jun 21 23:33:13 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jun 21 23:33:13 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jun 21 23:33:13 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun 21 23:33:14 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 22 12:08:27 2013] Spatial fit model total counts = 215.167000, observed total counts = 203.000000
[Sat Jun 22 12:08:27 2013] Offset between fit and detection position for source 36 = 0.242841 pixels
[Sat Jun 22 12:08:27 2013] 216.100800 total counts/ 163.565000 bgd. counts: snr = 4.107808
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.242841 pixels
  Position = (268.2, 221.7) = 11 4 47.94 38 4 4.4
  Extent = 6.7 (3.0-9.6)", rotation angle = 0
  Source counts = 52.5 +/- 14.7
  Background counts = 163.6
  Rate = 0.001 +/- 0.0004
[Sat Jun 22 12:08:27 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:27 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 12:08:27 2013] Source does appear to be extended
[Sat Jun 22 12:08:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:44:53 2013] XMMSAS src. selection expression = ellipse(23282.755960, 19239.784600, 401.279412, 401.279412, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing source region out to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_src.reg
[Sun Jun 23 12:44:53 2013] Extracting stamp from image fullrun_mos1_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (245, 199) - (291, 245)
[Sun Jun 23 12:44:53 2013] XMMSAS bgd. selection expression = annulus(23282.755960, 19239.784600, 668.799019, 1337.598038, X, Y)
[Sun Jun 23 12:44:53 2013] Writing fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36.gif
[Sun Jun 23 12:48:54 2013] Mean detx,y = (-5212.03, -7445.62) 
[Sun Jun 23 12:48:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:49:08 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:49:09 2013] Setting source spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun Jun 23 12:49:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun Jun 23 13:25:45 2013] Not generating rmf since there are only 52 counts
[Sun Jun 23 13:25:45 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:40 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:40 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 92.00
[Sun Jun 23 18:10:40 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_bgd.pi.gz = 196.00
[Sun Jun 23 18:10:40 2013] Got source and background scale factors 506380.000000, 2880092.000000
[Sun Jun 23 18:10:40 2013] User source parameters:
  Position = (268.2, 221.7) = 11 4 47.94 38 4 4.4
  Extent = 6.7 (3.0-9.6)", rotation angle = 0
  Source aperture counts = 57.5 +/- 10.6
  Background aperture counts = 34.5
  Rate = 0.001 +/- 0.0003

[Sun Jun 23 18:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:47 2013] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36.arf
[Sun Jun 23 18:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:48 2013] Updating source flux to 2.6e-14
[Sun Jun 23 18:11:07 2013] Flag b found in src. 36 procflags, skipping spectral fitting
[Sun Jun 23 18:11:07 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 18:11:17 2013] xmm0153950601/analysis//spectral/fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete