[Thu Jun 20 07:21:04 2013] Detection parameters:
  Position = (384.4, 349.7) = 11 4 5.05 38 13 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 13.1
  Background counts = 40.4
  Rate = 0.002 +/- 0.0005

[Thu Jun 20 07:21:06 2013] Off-axis axis estimate = 7.26'
[Thu Jun 20 22:52:55 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:52:55 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Thu Jun 20 22:52:55 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.948
[Thu Jun 20 22:52:55 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 10.06"
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 21 01:24:41 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 21 01:24:42 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jun 21 10:55:16 2013] Source 23 is offset by 7.103844 and -3.614659 pixels which is larger than
2 X fitted extent = 1.143549 x 1.240566, not incorporating fit results
[Fri Jun 21 10:55:16 2013] Source 23 is offset by -2.659375 and -6.607142 pixels which is larger than
2 X fitted extent = 1.895968 x 1.156000, not incorporating fit results
[Fri Jun 21 10:55:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:16 2013] Assessing source extent using major
[Fri Jun 21 10:55:16 2013] Source does appear to be extended
[Fri Jun 21 10:55:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 20:03:26 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:03:26 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri Jun 21 20:03:26 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.948
[Fri Jun 21 20:03:26 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 10.06"
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23.csv
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23.csv
[Fri Jun 21 23:33:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 23:33:15 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jun 21 23:33:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 21 23:33:15 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jun 21 23:33:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 21 23:33:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:27 2013] Spatial fit model total counts = 1297.420000, observed total counts = 614.000000
[Sat Jun 22 12:08:27 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:27 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:27 2013] Assessing source extent using major
[Sat Jun 22 12:08:27 2013] Source does appear to be extended
[Sat Jun 22 12:08:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:44:53 2013] XMMSAS src. selection expression = ellipse(33395.300415, 30375.804626, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing source region out to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun 23 12:44:53 2013] Extracting stamp from image fullrun_mos1_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (347, 312) - (422, 387)
[Sun Jun 23 12:44:53 2013] XMMSAS bgd. selection expression = annulus(33395.300415, 30375.804626, 1087.500000, 2175.000000, X, Y) && !ellipse(33636.444380, 31010.514400, 413.709612, 249.380007, 81.828180, X, Y) && !ellipse(30850.616791, 32707.645172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32223.614746, 31352.635040, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23.gif
[Sun Jun 23 12:56:15 2013] Mean detx,y = (-2219.55, 7322.45) 
[Sun Jun 23 12:56:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:56:31 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:56:31 2013] Setting source spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jun 23 12:56:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun 23 13:34:26 2013] Not generating rmf since there are only 59 counts
[Sun Jun 23 13:34:26 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:43 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:43 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 467.00
[Sun Jun 23 18:10:43 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_bgd.pi.gz = 939.00
[Sun Jun 23 18:10:43 2013] Got source and background scale factors 1204460.000000, 4939501.000000
[Sun Jun 23 18:10:43 2013] User source parameters:
  Position = (384.4, 349.7) = 11 4 5.05 38 13 18.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 238.0 +/- 22.6
  Background aperture counts = 229.0
  Rate = 0.006 +/- 0.0006

[Sun Jun 23 18:10:43 2013] Updating counts from extracted products
[Sun Jun 23 18:10:43 2013] Set source signif. to 238.03/15.13 = 15.73
[Sun Jun 23 18:10:48 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:48 2013] Using photon index=1.80, rate=0.00613, arf fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23.arf
[Sun Jun 23 18:10:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:48 2013] Updating source flux to 7.9e-14
[Sun Jun 23 18:11:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:17 2013] xmm0153950601/analysis//spectral/fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete