[Thu Jun 20 07:21:04 2013] Detection parameters:
  Position = (370.9, 360.9) = 11 4 10.02 38 14 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 11.9
  Background counts = 33.4
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 07:21:06 2013] Off-axis axis estimate = 6.94'
[Thu Jun 20 22:52:55 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:52:55 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Thu Jun 20 22:52:55 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.876
[Thu Jun 20 22:52:55 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.90"
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 21 01:24:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15.csv
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 21 01:24:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15.csv
[Fri Jun 21 01:24:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 21 01:24:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 21 01:24:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Fri Jun 21 01:24:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 10:55:16 2013] Warning, spatial fit 15 centroid is now closest to src. 23
[Fri Jun 21 10:55:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:16 2013] Assessing source extent using major
[Fri Jun 21 10:55:16 2013] Source does appear to be extended
[Fri Jun 21 10:55:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 20:03:26 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:03:26 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Fri Jun 21 20:03:26 2013] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.876
[Fri Jun 21 20:03:26 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.90"
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15.csv
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15.csv
[Fri Jun 21 23:33:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 23:33:15 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Jun 21 23:33:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 21 23:33:15 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Jun 21 23:33:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri Jun 21 23:33:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:27 2013] Spatial fit model total counts = 576.457000, observed total counts = 482.000000
[Sat Jun 22 12:08:27 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 12:08:27 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:27 2013] Assessing source extent using major
[Sat Jun 22 12:08:27 2013] Source does appear to be extended
[Sat Jun 22 12:08:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:44:53 2013] XMMSAS src. selection expression = ellipse(32223.614746, 31352.635040, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing source region out to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 23 12:44:53 2013] Extracting stamp from image fullrun_mos1_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (333, 323) - (408, 398)
[Sun Jun 23 12:44:53 2013] XMMSAS bgd. selection expression = annulus(32223.614746, 31352.635040, 1087.500000, 2175.000000, X, Y) && !ellipse(33636.444380, 31010.514400, 413.709612, 249.380007, 81.828180, X, Y) && !ellipse(30850.616791, 32707.645172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30287.153198, 33506.843506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33395.300415, 30375.804626, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19.gif
[Sun Jun 23 12:51:20 2013] Mean detx,y = (-755.86, 7001.60) 
[Sun Jun 23 12:51:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:51:40 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:51:40 2013] Setting source spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 23 12:51:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 23 13:30:07 2013] Not generating rmf since there are only 69 counts
[Sun Jun 23 13:30:07 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:41 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:41 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 363.00
[Sun Jun 23 18:10:42 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_bgd.pi.gz = 657.00
[Sun Jun 23 18:10:42 2013] Got source and background scale factors 994030.000000, 2846301.000000
[Sun Jun 23 18:10:42 2013] User source parameters:
  Position = (370.9, 360.9) = 11 4 10.02 38 14 7.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 133.6 +/- 20.1
  Background aperture counts = 229.4
  Rate = 0.003 +/- 0.0005

[Sun Jun 23 18:10:42 2013] Updating counts from extracted products
[Sun Jun 23 18:10:42 2013] Set source signif. to 133.55/15.15 = 8.82
[Sun Jun 23 18:10:48 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:48 2013] Using photon index=1.80, rate=0.00344, arf fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19.arf
[Sun Jun 23 18:10:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:48 2013] Updating source flux to 4.7e-14
[Sun Jun 23 18:11:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:17 2013] xmm0153950601/analysis//spectral/fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete