[Thu Jun 20 07:21:04 2013] Detection parameters:
  Position = (261.8, 422.0) = 11 4 50.31 38 18 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.7 +/- 13.0
  Background counts = 14.6
  Rate = 0.003 +/- 0.0005

[Thu Jun 20 07:21:06 2013] Off-axis axis estimate = 9.34'
[Thu Jun 20 22:52:55 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 22:52:55 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Thu Jun 20 22:52:55 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Thu Jun 20 22:52:55 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.10"
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 21 01:24:41 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 21 01:24:41 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_src9 appears to have run properly
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 21 01:24:42 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 21 01:24:42 2013] Fit fullrun_mos1_xmm0153950601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun 21 10:55:16 2013] Warning, spatial fit 9 centroid is now closest to src. 12
[Fri Jun 21 10:55:16 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 10:55:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 10:55:16 2013] Assessing source extent using major
[Fri Jun 21 10:55:16 2013] Source does appear to be extended
[Fri Jun 21 10:55:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 10:55:16 2013] Source is confused with source 14
[Fri Jun 21 20:03:26 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 20:03:26 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri Jun 21 20:03:26 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Fri Jun 21 20:03:26 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.10"
[Fri Jun 21 23:33:13 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 21 23:33:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 21 23:33:13 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 21 23:33:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 21 23:33:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun 21 23:33:14 2013] fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 21 23:33:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Jun 21 23:33:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 12:08:27 2013] Source 13 is offset by -7.805181 and -0.698003 pixels which is larger than
2 X fitted extent = 0.706437 x 0.706437, not incorporating fit results
[Sat Jun 22 12:08:27 2013] Warning, spatial fit 9 centroid is now closest to src. 15
[Sat Jun 22 12:08:27 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 12:08:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 12:08:27 2013] Assessing source extent using major
[Sat Jun 22 12:08:27 2013] Source does appear to be extended
[Sat Jun 22 12:08:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:44:53 2013] XMMSAS src. selection expression = ellipse(22732.129272, 36661.453735, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing source region out to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 12:44:53 2013] Extracting stamp from image fullrun_mos1_xmm0153950601_pi300-10000_cl_sm2.00.img.gz, (224, 384) - (299, 459)
[Sun Jun 23 12:44:53 2013] XMMSAS bgd. selection expression = annulus(22732.129272, 36661.453735, 1087.500000, 2175.000000, X, Y) && !ellipse(22969.529400, 36192.478600, 575.321617, 408.036812, 0.138952, X, Y) && !ellipse(23659.265503, 35522.395721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21903.499000, 37733.699000, 2234.880064, 396.461611, 51.812200, X, Y) && !ellipse(23998.912000, 35015.450000, 1686.456049, 1686.456049, 0.000000, X, Y) && !ellipse(21307.504200, 38568.378000, 1941.872056, 410.055212, 54.400100, X, Y) && !ellipse(21516.626000, 38275.578000, 2130.792061, 2130.792061, 0.000000, X, Y) && !ellipse(22058.512000, 37429.908000, 2293.376066, 2293.376066, 0.000000, X, Y) && !ellipse(20354.789800, 39828.291000, 2023.344058, 463.898413, 232.246000, X, Y) && !ellipse(19408.004420, 41148.662200, 2619.680075, 489.747214, 52.723700, X, Y) && !ellipse(20180.807200, 40080.258400, 2522.664073, 505.695215, 53.547100, X, Y) && !ellipse(19462.611400, 41066.363400, 2589.656075, 485.020014, 52.834700, X, Y) && !ellipse(20869.172211, 39296.915466, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 12:44:53 2013] Writing fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 12:48:39 2013] Mean detx,y = (8969.92, 2414.20) 
[Sun Jun 23 12:48:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:48:51 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:48:51 2013] Setting source spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 12:48:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 13:25:39 2013] Not generating rmf since there are only 78 counts
[Sun Jun 23 13:25:39 2013] rmf not generated due to insufficient counts
[Sun Jun 23 18:10:40 2013] Updating aperture counts using extracted products
[Sun Jun 23 18:10:40 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 416.00
[Sun Jun 23 18:10:40 2013] Total counts from fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_bgd.pi.gz = 95.00
[Sun Jun 23 18:10:40 2013] Got source and background scale factors 1326764.000000, 1174468.000000
[Sun Jun 23 18:10:40 2013] User source parameters:
  Position = (261.8, 422.0) = 11 4 50.31 38 18 37.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 308.7 +/- 21.4
  Background aperture counts = 107.3
  Rate = 0.008 +/- 0.0006

[Sun Jun 23 18:10:40 2013] Updating counts from extracted products
[Sun Jun 23 18:10:40 2013] Set source signif. to 308.68/10.36 = 29.80
[Sun Jun 23 18:10:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 18:10:47 2013] Using photon index=1.80, rate=0.00795, arf fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 18:10:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 18:10:47 2013] Updating source flux to 1.2e-13
[Sun Jun 23 18:11:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 18:11:17 2013] xmm0153950601/analysis//spectral/fullrun_mos1_xmm0153950601_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete