[Wed May  1 01:06:31 2013] Detection parameters:
  Position = (276.9, 216.1) = 16 57 51.93 35 15 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.4 +/- 22.0
  Background counts = 21.8
  Rate = 0.05 +/- 0.004

[Wed May  1 01:06:32 2013] Off-axis axis estimate = 6.17'
[Wed May  1 01:37:31 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Wed May  1 01:37:31 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Wed May  1 01:37:31 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.108
[Wed May  1 01:37:31 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.51"
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13.ximg exists
[Wed May  1 18:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13.csv
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May  1 18:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13.csv
[Wed May  1 18:19:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May  1 18:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May  1 18:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed May  1 18:19:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 18:20:10 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.704214 pixels away
[Wed May  1 18:20:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 18:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 18:20:10 2013] Assessing source extent using major
[Wed May  1 18:20:10 2013] Source does appear to be extended
[Wed May  1 18:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 18:20:11 2013] Source is confused with source 15
[Wed May  1 18:20:11 2013] Source is confused with source 20
[Wed May  1 18:50:42 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Wed May  1 18:50:42 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Wed May  1 18:50:42 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.108
[Wed May  1 18:50:42 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.51"
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12.csv
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12.csv
[Thu May  2 04:40:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu May  2 04:40:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:41:00 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.704214 pixels away
[Thu May  2 04:41:00 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 73.169187 pixels away
[Thu May  2 04:41:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 04:41:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 04:41:00 2013] Assessing source extent using major
[Thu May  2 04:41:00 2013] Source does appear to be extended
[Thu May  2 04:41:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 04:51:36 2013] XMMSAS src. selection expression = ellipse(24045.420929, 18751.558014, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 04:51:36 2013] Writing source region out to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_src.reg
[Thu May  2 04:51:36 2013] Extracting stamp from image fullrun_mos2_xmm0153950301_pi300-10000_cl_sm2.00.img.gz, (239, 179) - (314, 254)
[Thu May  2 04:51:36 2013] XMMSAS bgd. selection expression = annulus(24045.420929, 18751.558014, 1087.500000, 2175.000000, X, Y) && !ellipse(24593.313600, 24412.989400, 6972.768201, 6346.608183, 343.043000, X, Y) && !ellipse(26150.344000, 21402.326000, 1294.352037, 1294.352037, 0.000000, X, Y) && !ellipse(24121.723600, 19525.328200, 1482.552043, 399.032811, 98.944250, X, Y) && !ellipse(24146.508440, 19744.520000, 1448.288042, 427.291212, 96.559380, X, Y) && !ellipse(24283.197388, 21455.336304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.352234, 20305.404617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.684000, 15107.022000, 3521.824101, 1335.208038, 98.927690, X, Y)
[Thu May  2 04:51:36 2013] Writing fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13.gif
[Thu May  2 05:26:41 2013] Mean detx,y = (40.84, 5662.32) 
[Thu May  2 05:26:41 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 05:26:55 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 05:26:55 2013] Setting source spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu May  2 05:26:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu May  2 06:12:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 06:12:40 2013] rmf not generated due to insufficient counts
[Thu May  2 06:52:21 2013] Updating aperture counts using extracted products
[Thu May  2 06:52:21 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 736.00
[Thu May  2 06:52:21 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 104.00
[Thu May  2 06:52:21 2013] Got source and background scale factors 1154084.000000, 1517845.000000
[Thu May  2 06:52:21 2013] User source parameters:
  Position = (276.9, 216.1) = 16 57 51.93 35 15 50.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 656.9 +/- 28.1
  Background aperture counts = 79.1
  Rate = 0.08 +/- 0.004

[Thu May  2 06:52:21 2013] Updating counts from extracted products
[Thu May  2 06:52:21 2013] Set source signif. to 656.92/8.89 = 73.87
[Thu May  2 06:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 06:52:23 2013] Using photon index=1.80, rate=0.0819, arf fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13.arf
[Thu May  2 06:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 06:52:23 2013] Updating source flux to 1.2e-12
[Thu May  2 06:52:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 06:52:38 2013] xmm0153950301/analysis//spectral/fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete