[Wed May  1 01:06:30 2013] Detection parameters:
  Position = (287.3, 311.9) = 16 57 48.25 35 22 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 438.0 +/- 33.5
  Background counts = 82.4
  Rate = 0.06 +/- 0.004

[Wed May  1 01:06:32 2013] Off-axis axis estimate = 1.26'
[Wed May  1 01:37:31 2013] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Wed May  1 01:37:31 2013] Initial guess for spatial extent in simple fitting = 7.06"
[Wed May  1 01:37:31 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Wed May  1 01:37:31 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.06"
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12.ximg exists
[Wed May  1 18:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12.csv
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May  1 18:19:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12.csv
[Wed May  1 18:19:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May  1 18:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May  1 18:19:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed May  1 18:19:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 18:20:10 2013] Spatial fit model total counts = 3779.110000, observed total counts = 3226.000000
[Wed May  1 18:20:10 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 18:20:10 2013] Source 11 is offset by -1.456952 and 5.370177 pixels which is larger than
2 X fitted extent = 5.066989 x 3.780901, not incorporating fit results
[Wed May  1 18:20:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 18:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 18:20:10 2013] Assessing source extent using major
[Wed May  1 18:20:10 2013] Source does appear to be extended
[Wed May  1 18:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 18:20:11 2013] Source is confused with source 14
[Wed May  1 18:50:42 2013] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Wed May  1 18:50:42 2013] Initial guess for spatial extent in simple fitting = 7.06"
[Wed May  1 18:50:42 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Wed May  1 18:50:42 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.06"
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11.csv
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11.csv
[Thu May  2 04:40:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11.csv
[Thu May  2 04:40:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:41:00 2013] Spatial fit model total counts = 3777.350000, observed total counts = 3226.000000
[Thu May  2 04:41:00 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 04:41:00 2013] Warning, spatial fit 11 centroid is now closest to src. 14
[Thu May  2 04:41:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 04:41:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 04:41:00 2013] Assessing source extent using major
[Thu May  2 04:41:00 2013] Source does appear to be extended
[Thu May  2 04:41:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 04:51:36 2013] XMMSAS src. selection expression = ellipse(24947.979553, 27084.829437, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 04:51:36 2013] Writing source region out to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_src.reg
[Thu May  2 04:51:36 2013] Extracting stamp from image fullrun_mos2_xmm0153950301_pi300-10000_cl_sm2.00.img.gz, (250, 274) - (325, 349)
[Thu May  2 04:51:36 2013] XMMSAS bgd. selection expression = annulus(24947.979553, 27084.829437, 1087.500000, 2175.000000, X, Y) && !ellipse(25028.704200, 24586.460400, 3439.704099, 3439.704099, 0.000000, X, Y) && !ellipse(24265.073800, 24803.741600, 3466.320100, 3466.320100, 0.000000, X, Y) && !ellipse(24593.313600, 24412.989400, 6972.768201, 6346.608183, 343.043000, X, Y) && !ellipse(23724.366821, 24665.229553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.613739, 24243.632141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.204315, 25090.339569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.365723, 25706.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24961.315765, 27437.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24257.002869, 27606.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25062.344000, 28799.544000, 1189.512034, 367.316811, 279.877000, X, Y) && !ellipse(24119.315704, 26819.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.614000, 26369.748000, 1103.504032, 1103.504032, 359.980000, X, Y) && !ellipse(25153.988600, 30509.124000, 1314.832038, 807.088023, 97.557990, X, Y) && !ellipse(21949.079720, 28170.197800, 1328.792038, 409.521612, 56.337046, X, Y) && !ellipse(24172.482666, 28064.901642, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 04:51:36 2013] Writing fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11.gif
[Thu May  2 05:26:24 2013] Mean detx,y = (90.18, -2606.18) 
[Thu May  2 05:26:25 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 05:26:36 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 05:26:36 2013] Setting source spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May  2 05:26:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu May  2 06:12:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 06:12:34 2013] rmf not generated due to insufficient counts
[Thu May  2 06:52:21 2013] Updating aperture counts using extracted products
[Thu May  2 06:52:21 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 3145.00
[Thu May  2 06:52:21 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 0.00
[Thu May  2 06:52:21 2013] Got source and background scale factors 1328068.000000, 0.000000
[Thu May  2 06:52:21 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May  2 06:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 06:52:23 2013] Using photon index=1.80, rate=0.0568, arf fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11.arf
[Thu May  2 06:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 06:52:23 2013] Updating source flux to 6.2e-13
[Thu May  2 06:52:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 06:52:38 2013] xmm0153950301/analysis//spectral/fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete