[Wed May  1 01:06:30 2013] Detection parameters:
  Position = (288.0, 281.0) = 16 57 48.02 35 20 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49772.5 +/- 267.9
  Background counts = 83.3
  Rate = 6 +/- 0.03

[Wed May  1 01:06:32 2013] Off-axis axis estimate = 1.47'
[Wed May  1 01:37:31 2013] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Wed May  1 01:37:31 2013] Initial guess for spatial extent in simple fitting = 7.17"
[Wed May  1 01:37:31 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Wed May  1 01:37:31 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.17"
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  1 18:19:54 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  1 18:19:54 2013] Fit fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  1 18:19:55 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  1 18:19:55 2013] Fit fullrun_mos2_xmm0153950301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May  1 18:20:10 2013] Spatial fit model total counts = 145973.000000, observed total counts = 152355.000000
[Wed May  1 18:20:10 2013] Offset between fit and detection position for source 1 = 2.182435 pixels
[Wed May  1 18:20:10 2013] 108714.600000 total counts/ 25600.000000 bgd. counts: snr = 519.466250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.182435 pixels
  Position = (288.2, 283.2) = 16 57 47.92 35 20 41.9
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source counts = 83114.6 +/- 329.7
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.04
[Wed May  1 18:20:10 2013] Vigneting correction estimate = 1.000000
[Wed May  1 18:20:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 18:20:10 2013] Assessing source extent using major axis lower bound
[Wed May  1 18:20:10 2013] Source does appear to be extended
[Wed May  1 18:20:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 18:20:11 2013] Source is confused with source 5
[Wed May  1 18:20:11 2013] Source is confused with source 4
[Wed May  1 18:50:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 18:50:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 18:50:42 2013] Initial guess for spatial extent in simple fitting = 14.33"
[Wed May  1 18:50:42 2013] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.111
[Wed May  1 18:50:42 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.33"
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1.csv
[Thu May  2 04:40:48 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  2 04:40:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1.csv
[Thu May  2 04:40:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  2 04:40:49 2013] fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  2 04:40:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May  2 04:40:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:41:00 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Thu May  2 04:41:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 04:41:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 04:41:00 2013] Assessing source extent using major axis lower bound
[Thu May  2 04:41:00 2013] Source does appear to be extended
[Thu May  2 04:41:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 04:51:35 2013] Counts = 83114.600000, rescaling region sizes by 3.000000
[Thu May  2 04:51:35 2013] XMMSAS src. selection expression = ellipse(25028.704200, 24586.460400, 2579.778074, 2579.778074, 0.000000, X, Y)
[Thu May  2 04:51:35 2013] Writing source region out to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_src.reg
[Thu May  2 04:51:35 2013] Extracting stamp from image fullrun_mos2_xmm0153950301_pi300-10000_cl_sm2.00.img.gz, (140, 135) - (437, 431)
[Thu May  2 04:51:35 2013] XMMSAS bgd. selection expression = annulus(25028.704200, 24586.460400, 12898.890371, 25797.780742, X, Y) && !ellipse(24265.073800, 24803.741600, 3466.320100, 3466.320100, 0.000000, X, Y) && !ellipse(24593.313600, 24412.989400, 6972.768201, 6346.608183, 343.043000, X, Y) && !ellipse(23724.366821, 24665.229553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.613739, 24243.632141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.204315, 25090.339569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23880.365723, 25706.696655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.304657, 23148.676819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27072.024000, 23581.818000, 1171.104034, 1115.832032, 64.286900, X, Y) && !ellipse(26865.160000, 22627.522000, 1228.816035, 1228.816035, 347.681000, X, Y) && !ellipse(24961.315765, 27437.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24947.979553, 27084.829437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24045.420929, 18751.558014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.344000, 21402.326000, 1294.352037, 1294.352037, 0.000000, X, Y) && !ellipse(24257.002869, 27606.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24121.723600, 19525.328200, 1482.552043, 399.032811, 98.944250, X, Y) && !ellipse(25062.344000, 28799.544000, 1189.512034, 367.316811, 279.877000, X, Y) && !ellipse(24146.508440, 19744.520000, 1448.288042, 427.291212, 96.559380, X, Y) && !ellipse(24119.315704, 26819.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24283.197388, 21455.336304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.352234, 20305.404617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.715637, 30145.321533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26183.614000, 26369.748000, 1103.504032, 1103.504032, 359.980000, X, Y) && !ellipse(25153.988600, 30509.124000, 1314.832038, 807.088023, 97.557990, X, Y) && !ellipse(21949.079720, 28170.197800, 1328.792038, 409.521612, 56.337046, X, Y) && !ellipse(28496.364000, 24643.134620, 1197.968034, 1197.968034, 0.000000, X, Y) && !ellipse(24172.482666, 28064.901642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.684000, 15107.022000, 3521.824101, 1335.208038, 98.927690, X, Y) && !ellipse(23511.814000, 13660.094000, 1844.288053, 777.276022, 294.505400, X, Y)
[Thu May  2 04:51:35 2013] Writing fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1.gif
[Thu May  2 04:51:53 2013] Mean detx,y = (81.75, -91.07) 
[Thu May  2 04:51:56 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 05:01:10 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 05:01:10 2013] Setting source spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  2 05:01:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  2 06:52:19 2013] Updating aperture counts using extracted products
[Thu May  2 06:52:19 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 307898.00
[Thu May  2 06:52:19 2013] Total counts from fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 9537.00
[Thu May  2 06:52:19 2013] Got source and background scale factors 20041980.000000, 348284333.000000
[Thu May  2 06:52:19 2013] User source parameters:
  Position = (288.2, 283.2) = 16 57 47.92 35 20 41.9
  Extent = 14.3 (14.3-28.7)", rotation angle = 0
  Source aperture counts = 307349.2 +/- 555.9
  Background aperture counts = 548.8
  Rate = 4e+01 +/- 0.07

[Thu May  2 06:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 06:52:23 2013] Using photon index=1.80, rate=10.4, arf fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1.arf
[Thu May  2 06:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 06:52:23 2013] Updating source flux to 9e-11
[Thu May  2 06:52:25 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu May  2 06:52:38 2013] xmm0153950301/analysis//spectral/fullrun_mos2_xmm0153950301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete