[Mon Mar 26 10:15:38 2012] Detection parameters:
  Position = (259.9, 390.8) = 2 5 35.58 64 51 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.6 +/- 15.9
  Background counts = 45.0
  Rate = 0.009 +/- 0.001

[Mon Mar 26 10:15:39 2012] Off-axis axis estimate = 7.25'
[Mon Mar 26 17:03:26 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 17:03:26 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Mon Mar 26 17:03:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.854
[Mon Mar 26 17:03:26 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.05"
[Mon Mar 26 20:54:25 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11.ximg exists
[Mon Mar 26 20:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11.csv
[Mon Mar 26 20:54:25 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Mar 26 20:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11.csv
[Mon Mar 26 20:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 20:54:26 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Mar 26 20:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Mar 26 20:54:26 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Mar 26 20:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Mar 26 20:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 20:55:01 2012] Source 28 is offset by -1.843587 and -9.483273 pixels which is larger than
2 X fitted extent = 9.245839 x 9.245839, not incorporating fit results
[Mon Mar 26 20:55:01 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 20:55:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 20:55:01 2012] Assessing source extent using major
[Mon Mar 26 20:55:01 2012] Source does appear to be extended
[Mon Mar 26 20:55:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 20:55:01 2012] Source is confused with source 11
[Tue Mar 27 02:23:04 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 02:23:04 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Tue Mar 27 02:23:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.854
[Tue Mar 27 02:23:04 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.05"
[Tue Mar 27 05:13:04 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10.ximg exists
[Tue Mar 27 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10.csv
[Tue Mar 27 05:13:04 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Mar 27 05:13:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10.csv
[Tue Mar 27 05:13:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:13:05 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Mar 27 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Mar 27 05:13:05 2012] fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Mar 27 05:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue Mar 27 05:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:13:35 2012] Source 28 is offset by -2.298691 and -9.483273 pixels which is larger than
2 X fitted extent = 9.245839 x 9.245839, not incorporating fit results
[Tue Mar 27 05:13:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 05:13:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 05:13:35 2012] Assessing source extent using major
[Tue Mar 27 05:13:35 2012] Source does appear to be extended
[Tue Mar 27 05:13:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 07:53:34 2012] XMMSAS src. selection expression = ellipse(22565.281921, 33947.841217, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 27 07:53:34 2012] Writing source region out to fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28_src.reg
[Tue Mar 27 07:53:34 2012] Extracting stamp from image fullrun_mos2_xmm0153752501_pi300-10000_cl_sm2.00.img.gz, (222, 353) - (297, 428)
[Tue Mar 27 07:53:34 2012] XMMSAS bgd. selection expression = annulus(22565.281921, 33947.841217, 1087.500000, 2175.000000, X, Y) && !ellipse(22922.036000, 31631.608000, 1396.184040, 1396.184040, 0.000000, X, Y) && !ellipse(20908.994000, 32252.022000, 1051.536030, 312.423209, 89.261000, X, Y) && !ellipse(24425.119324, 32032.675659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19850.232000, 32239.708000, 1582.000046, 1582.000046, 0.000000, X, Y) && !ellipse(23616.917786, 30927.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22570.878000, 30024.456000, 2638.912076, 2638.912076, 0.000000, X, Y) && !ellipse(23929.911224, 33199.606171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23508.757202, 33412.109406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20442.309875, 32759.027954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23021.941650, 33659.430695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25423.946655, 32370.230774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.312836, 31451.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24394.862610, 33180.574921, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 07:53:34 2012] Writing fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28.gif
[Tue Mar 27 08:00:57 2012] Mean detx,y = (-5591.89, -7035.17) 
[Tue Mar 27 08:00:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 08:01:22 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 08:01:23 2012] Setting source spectrum file to fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Mar 27 08:01:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Mar 27 08:33:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 27 08:33:50 2012] rmf not generated due to insufficient counts
[Tue Mar 27 08:39:31 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:39:31 2012] Error reading totcts from fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Mar 27 08:39:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:39:32 2012] Using photon index=1.80, rate=0.00933, arf fullrun_mos2_xmm0153752501_pi300-10000_pass1_cl_src28.arf
[Tue Mar 27 08:39:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:39:32 2012] Updating source flux to 1.4e-13
[Tue Mar 27 08:44:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting