[Mon Aug 27 16:08:57 2012] Detection parameters:
  Position = (357.5, 308.9) = 2 5 37.82 64 49 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10956.5 +/- 127.1
  Background counts = 179.6
  Rate = 0.8 +/- 0.009

[Mon Aug 27 16:08:58 2012] Off-axis axis estimate = 4.35'
[Mon Aug 27 16:11:46 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 16:11:46 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Mon Aug 27 16:11:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Mon Aug 27 16:11:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.60"
[Mon Aug 27 17:22:27 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 17:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 17:22:27 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 17:22:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 17:22:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 17:22:27 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 17:22:27 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 17:22:27 2012] Fit fullrun_pn_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 22:02:58 2012] Spatial fit model total counts = 14808.000000, observed total counts = 14795.000000
[Mon Aug 27 22:02:58 2012] Offset between fit and detection position for source 1 = 0.142814 pixels
[Mon Aug 27 22:02:58 2012] 14815.780000 total counts/ 9449.980000 bgd. counts: snr = 55.197453
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.142814 pixels
  Position = (357.4, 308.9) = 2 5 37.90 64 49 40.0
  Extent = 6.6 (6.5-6.8)", rotation angle = 0
  Source counts = 5365.8 +/- 121.7
  Background counts = 9450.0
  Rate = 0.3 +/- 0.008
[Mon Aug 27 22:02:59 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:02:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:02:59 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 22:02:59 2012] Source does appear to be extended
[Mon Aug 27 22:02:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:03:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:03:22 2012] Initial guess for spatial extent in simple fitting = 6.63"
[Mon Aug 27 22:03:22 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.975
[Mon Aug 27 22:03:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.63"
[Mon Aug 27 22:46:32 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 22:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 22:46:32 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 22:46:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 22:46:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:46:32 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 22:46:32 2012] fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 22:46:32 2012] Fit fullrun_pn_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 02:32:17 2012] Spatial fit model total counts = 14710.500000, observed total counts = 14715.000000
[Tue Aug 28 02:32:17 2012] Offset between fit and detection position for source 1 = 0.020826 pixels
[Tue Aug 28 02:32:17 2012] 14755.800000 total counts/ 9348.170000 bgd. counts: snr = 55.929852
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020826 pixels
  Position = (357.4, 308.8) = 2 5 37.91 64 49 39.9
  Extent = 6.7 (6.5-6.9)", rotation angle = 0
  Source counts = 5407.6 +/- 121.5
  Background counts = 9348.2
  Rate = 0.4 +/- 0.008
[Tue Aug 28 02:32:17 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:17 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 02:32:17 2012] Source does appear to be extended
[Tue Aug 28 02:32:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:32:37 2012] Counts = 5407.630000, rescaling region sizes by 2.000000
[Tue Aug 28 02:32:37 2012] XMMSAS src. selection expression = ellipse(31041.802400, 26819.827680, 804.594023, 804.594023, 0.000000, X, Y)
[Tue Aug 28 02:32:37 2012] Writing source region out to fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 02:32:37 2012] Extracting stamp from image fullrun_pn_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (311, 263) - (404, 355)
[Tue Aug 28 02:32:37 2012] XMMSAS bgd. selection expression = annulus(31041.802400, 26819.827680, 2681.980077, 5363.960154, X, Y) && !ellipse(29892.727356, 26652.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28701.517600, 27223.414200, 1240.736036, 1240.736036, 0.000000, X, Y) && !ellipse(28830.628021, 26499.610535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33494.488000, 25803.838000, 1489.496043, 1489.496043, 0.000000, X, Y) && !ellipse(31723.810791, 25532.954193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31400.712311, 24658.568085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.225922, 27359.016968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.524800, 26588.244400, 1073.832031, 1073.832031, 0.000000, X, Y) && !ellipse(29570.892670, 27538.053558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34685.835815, 26743.405945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28859.225342, 27691.652313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26313.460000, 26689.576000, 1010.224029, 1010.224029, 0.000000, X, Y) && !ellipse(32818.150146, 26309.518402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27487.002655, 25821.149658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29968.801910, 28028.843689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27289.054291, 27233.742065, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:32:37 2012] Writing fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 02:32:50 2012] Mean detx,y = (-5141.20, 4684.99) 
[Tue Aug 28 02:32:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:33:28 2012] grppha failed
[Tue Aug 28 02:33:28 2012] Setting source spectrum file to fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 02:33:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 03:00:50 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:54 2012] Source 1 has no response, skipping
[Tue Aug 28 03:00:55 2012] xmm0153752401/analysis//spectral/fullrun_pn_xmm0153752401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete