[Mon Aug 27 16:09:55 2012] Detection parameters:
  Position = (367.7, 283.1) = 2 5 30.92 64 47 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.8 +/- 16.2
  Background counts = 25.3
  Rate = 0.009 +/- 0.001

[Mon Aug 27 16:09:55 2012] Off-axis axis estimate = 5.14'
[Mon Aug 27 19:37:07 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 19:37:07 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Mon Aug 27 19:37:07 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.909
[Mon Aug 27 19:37:07 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.00"
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10.csv
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10.csv
[Mon Aug 27 22:02:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Aug 27 22:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Aug 27 22:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Aug 27 22:02:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:03:13 2012] Spatial fit model total counts = 957.183000, observed total counts = 700.000000
[Mon Aug 27 22:03:13 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Aug 27 22:03:13 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:13 2012] Assessing source extent using major
[Mon Aug 27 22:03:13 2012] Source does appear to be extended
[Mon Aug 27 22:03:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:03:13 2012] Source is confused with source 40
[Mon Aug 27 22:03:13 2012] Source is confused with source 38
[Tue Aug 28 01:11:32 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:11:32 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Tue Aug 28 01:11:32 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.909
[Tue Aug 28 01:11:32 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.00"
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6.csv
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6.csv
[Tue Aug 28 02:32:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Aug 28 02:32:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:32:29 2012] Source 42 is offset by -2.669568 and 1.422355 pixels which is larger than
2 X fitted extent = 1.519370 x 1.519370, not incorporating fit results
[Tue Aug 28 02:32:29 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:29 2012] Assessing source extent using major
[Tue Aug 28 02:32:29 2012] Source does appear to be extended
[Tue Aug 28 02:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:53:35 2012] XMMSAS src. selection expression = ellipse(31939.919556, 24582.174927, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:53:35 2012] Writing source region out to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42_src.reg
[Tue Aug 28 02:53:35 2012] Extracting stamp from image fullrun_mos2_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (330, 246) - (405, 321)
[Tue Aug 28 02:53:35 2012] XMMSAS bgd. selection expression = annulus(31939.919556, 24582.174927, 1087.500000, 2175.000000, X, Y) && !ellipse(31039.216800, 26822.780200, 506.711215, 506.711215, 0.000000, X, Y) && !ellipse(32490.779724, 27364.576599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29726.134888, 26234.293457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30354.070400, 24670.666000, 803.112023, 803.112023, 0.000000, X, Y) && !ellipse(32098.005310, 25200.034760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32700.848297, 26301.996704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33205.187042, 26319.105713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34398.819183, 26725.325195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28621.458000, 26319.262000, 1231.592035, 1231.592035, 0.000000, X, Y) && !ellipse(33734.607849, 25974.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28474.000000, 26660.306000, 2275.296065, 1261.168036, 113.327000, X, Y) && !ellipse(31510.673004, 24231.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.016663, 25687.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29934.824000, 25216.250000, 1263.680036, 1263.680036, 0.000000, X, Y) && !ellipse(28945.394318, 25609.817291, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:53:35 2012] Writing fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42.gif
[Tue Aug 28 02:55:17 2012] Mean detx,y = (7100.73, -3377.28) 
[Tue Aug 28 02:55:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:55:34 2012] grppha failed
[Tue Aug 28 02:55:34 2012] Setting source spectrum file to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42_src.pi.gz
[Tue Aug 28 02:55:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Aug 28 03:00:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 03:00:14 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42_src.pi.gz
[Tue Aug 28 03:00:51 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 03:00:54 2012] xmm0153752401/analysis//spectral/fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete