[Mon Aug 27 16:09:55 2012] Detection parameters:
  Position = (388.3, 299.1) = 2 5 16.83 64 48 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 13.5
  Background counts = 22.5
  Rate = 0.006 +/- 0.001

[Mon Aug 27 16:09:55 2012] Off-axis axis estimate = 6.52'
[Mon Aug 27 19:37:07 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 19:37:07 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Mon Aug 27 19:37:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Mon Aug 27 19:37:07 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.69"
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18.csv
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18.csv
[Mon Aug 27 22:02:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Aug 27 22:02:51 2012] Fit fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Aug 27 22:03:13 2012] Warning, spatial fit 18 centroid is now closest to src. 3
[Mon Aug 27 22:03:13 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:13 2012] Assessing source extent using major
[Mon Aug 27 22:03:13 2012] Source does appear to be extended
[Mon Aug 27 22:03:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:03:13 2012] Source is confused with source 33
[Tue Aug 28 01:11:32 2012] Using EEF radius (= 9.69 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 01:11:32 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Tue Aug 28 01:11:32 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Tue Aug 28 01:11:32 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.69"
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13.csv
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Aug 28 02:32:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13.csv
[Tue Aug 28 02:32:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Aug 28 02:32:12 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Aug 28 02:32:12 2012] Fit fullrun_mos2_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Aug 28 02:32:29 2012] Spatial fit model total counts = 935.798000, observed total counts = 817.000000
[Tue Aug 28 02:32:29 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 02:32:29 2012] Warning, spatial fit 13 centroid is now closest to src. 33
[Tue Aug 28 02:32:29 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.655882 pixels away
[Tue Aug 28 02:32:29 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:29 2012] Assessing source extent using major
[Tue Aug 28 02:32:29 2012] Source does appear to be extended
[Tue Aug 28 02:32:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:53:35 2012] XMMSAS src. selection expression = ellipse(33734.607849, 25974.944885, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:53:35 2012] Writing source region out to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31_src.reg
[Tue Aug 28 02:53:35 2012] Extracting stamp from image fullrun_mos2_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (351, 262) - (426, 337)
[Tue Aug 28 02:53:35 2012] XMMSAS bgd. selection expression = annulus(33734.607849, 25974.944885, 1087.500000, 2175.000000, X, Y) && !ellipse(32490.779724, 27364.576599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31939.919556, 24582.174927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.005310, 25200.034760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32700.848297, 26301.996704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33205.187042, 26319.105713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34398.819183, 26725.325195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32777.504303, 28425.297974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31510.673004, 24231.814606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32371.016663, 25687.299011, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:53:35 2012] Writing fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31.gif
[Tue Aug 28 02:57:18 2012] Mean detx,y = (7967.49, -5418.63) 
[Tue Aug 28 02:57:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:57:32 2012] grppha failed
[Tue Aug 28 02:57:32 2012] Setting source spectrum file to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31_src.pi.gz
[Tue Aug 28 02:57:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Aug 28 03:00:15 2012] Not generating rmf since there are only 79 counts
[Tue Aug 28 03:00:15 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:00:51 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:51 2012] Error reading totcts from fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31_src.pi.gz
[Tue Aug 28 03:00:51 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 03:00:54 2012] xmm0153752401/analysis//spectral/fullrun_mos2_xmm0153752401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete