[Mon Aug 27 16:09:54 2012] Detection parameters:
  Position = (357.9, 291.1) = 2 5 37.58 64 48 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.8 +/- 24.1
  Background counts = 30.0
  Rate = 0.02 +/- 0.001

[Mon Aug 27 16:09:55 2012] Off-axis axis estimate = 4.34'
[Mon Aug 27 19:37:07 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 19:37:07 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Mon Aug 27 19:37:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Mon Aug 27 19:37:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.60"
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2.csv
[Mon Aug 27 22:02:50 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Aug 27 22:02:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2.csv
[Mon Aug 27 22:02:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Aug 27 22:02:51 2012] fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Aug 27 22:02:51 2012] Fit fullrun_mos2_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Aug 27 22:03:13 2012] Source 1 is offset by 0.272560 and -8.824274 pixels which is larger than
2 X fitted extent = 4.146961 x 4.146961, not incorporating fit results
[Mon Aug 27 22:03:13 2012] Spatial fit model total counts = 1389.990000, observed total counts = 1389.000000
[Mon Aug 27 22:03:13 2012] Offset between fit and detection position for source 1 = 0.887861 pixels
[Mon Aug 27 22:03:13 2012] Warning, changing simple spatial fit ID from 2 to 6
[Mon Aug 27 22:03:13 2012] 1459.498400 total counts/ 1445.260000 bgd. counts: snr = 0.374531
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.887861 pixels
  Position = (357.3, 291.8) = 2 5 37.95 64 48 25.7
  Extent = 2.1" x 2.1", rotation angle = 0
  Source counts = 14.2 +/- 38.2
  Background counts = 1445.3
  Rate = 0.0007 +/- 0.002
  Deleting source due to low Poisson probability