[Mon Aug 27 16:09:25 2012] Detection parameters:
  Position = (377.6, 325.7) = 2 5 24.06 64 50 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.7 +/- 13.0
  Background counts = 26.5
  Rate = 0.004 +/- 0.0006

[Mon Aug 27 16:09:26 2012] Off-axis axis estimate = 6.07'
[Mon Aug 27 17:22:28 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:22:28 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Mon Aug 27 17:22:28 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.733
[Mon Aug 27 17:22:28 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.46"
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31.ximg exists
[Mon Aug 27 19:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31.csv
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Aug 27 19:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31.csv
[Mon Aug 27 19:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 19:37:07 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Aug 27 19:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 27 19:37:07 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Aug 27 19:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Aug 27 19:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:03:07 2012] Warning, spatial fit 31 centroid is now closest to src. 3
[Mon Aug 27 22:03:07 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:07 2012] Assessing source extent using major
[Mon Aug 27 22:03:07 2012] Source does appear to be extended
[Mon Aug 27 22:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:03:07 2012] Source is confused with source 3
[Mon Aug 27 22:46:32 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:46:32 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Mon Aug 27 22:46:32 2012] source mask rpix=2.2, npix_max = 28, mask sum = 21, frac = 0.733
[Mon Aug 27 22:46:32 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 9.46"
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27.ximg exists
[Tue Aug 28 01:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27.csv
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Aug 28 01:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27.csv
[Tue Aug 28 01:11:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 01:11:32 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Aug 28 01:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Aug 28 01:11:32 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Aug 28 01:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Aug 28 01:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 02:32:24 2012] Warning, spatial fit 27 centroid is now closest to src. 10
[Tue Aug 28 02:32:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:24 2012] Assessing source extent using major
[Tue Aug 28 02:32:24 2012] Source does appear to be extended
[Tue Aug 28 02:32:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:42:22 2012] XMMSAS src. selection expression = ellipse(32803.770508, 28290.079987, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing source region out to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5_src.reg
[Tue Aug 28 02:42:22 2012] Extracting stamp from image fullrun_mos1_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (340, 288) - (415, 363)
[Tue Aug 28 02:42:22 2012] XMMSAS bgd. selection expression = annulus(32803.770508, 28290.079987, 1087.500000, 2175.000000, X, Y) && !ellipse(31024.406000, 26826.988000, 387.340011, 387.340011, 0.000000, X, Y) && !ellipse(32922.035400, 27532.236000, 2924.480084, 2924.480084, 0.000000, X, Y) && !ellipse(30692.833710, 25447.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.296000, 27399.832000, 3133.504090, 3133.504090, 0.000000, X, Y) && !ellipse(31757.012000, 28074.562000, 614.874418, 614.874418, 0.000000, X, Y) && !ellipse(33108.111206, 26319.647339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.084000, 26354.312000, 2382.704069, 2382.704069, 0.000000, X, Y) && !ellipse(33924.697200, 26039.837600, 920.088026, 920.088026, 0.000000, X, Y) && !ellipse(31239.278200, 28985.478000, 1462.240042, 1462.240042, 0.000000, X, Y) && !ellipse(32792.165375, 25615.398163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.026080, 26848.544200, 1627.288047, 1627.288047, 0.000000, X, Y) && !ellipse(34061.282400, 25769.290000, 1566.752045, 1566.752045, 0.000000, X, Y) && !ellipse(32085.845276, 25416.799316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.742188, 28471.099884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33700.126984, 27991.219269, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5.gif
[Tue Aug 28 02:52:28 2012] Mean detx,y = (-6625.77, -6224.90) 
[Tue Aug 28 02:52:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:52:44 2012] grppha failed
[Tue Aug 28 02:52:44 2012] Setting source spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5_src.pi.gz
[Tue Aug 28 02:52:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Aug 28 02:53:35 2012] Not generating rmf since there are only 81 counts
[Tue Aug 28 02:53:35 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5_src.pi.gz
[Tue Aug 28 03:00:50 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 03:00:53 2012] xmm0153752401/analysis//spectral/fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete