[Mon Aug 27 16:09:26 2012] Detection parameters:
  Position = (314.3, 300.1) = 2 6 7.28 64 49 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 14.5
  Background counts = 29.4
  Rate = 0.004 +/- 0.0007

[Mon Aug 27 16:09:26 2012] Off-axis axis estimate = 1.15'
[Mon Aug 27 17:22:28 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:22:28 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Aug 27 17:22:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Mon Aug 27 17:22:28 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.01"
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30.ximg exists
[Mon Aug 27 19:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30.csv
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Aug 27 19:37:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30.csv
[Mon Aug 27 19:37:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 19:37:07 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Aug 27 19:37:07 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Aug 27 19:37:07 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Aug 27 22:03:07 2012] Spatial fit model total counts = 583.678000, observed total counts = 582.000000
[Mon Aug 27 22:03:07 2012] Offset between fit and detection position for source 32 = 3.134647 pixels
[Mon Aug 27 22:03:07 2012] 578.454600 total counts/ 496.891000 bgd. counts: snr = 3.659029
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 3.134647 pixels
  Position = (316.9, 298.3) = 2 6 5.51 64 48 54.5
  Extent = 14.0 (13.7-28.0)", rotation angle = 0
  Source counts = 81.6 +/- 24.1
  Background counts = 496.9
  Rate = 0.004 +/- 0.001
[Mon Aug 27 22:03:07 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:07 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 22:03:07 2012] Source does appear to be extended
[Mon Aug 27 22:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:03:07 2012] Source is confused with source 29
[Mon Aug 27 22:03:07 2012] Source is confused with source 36
[Mon Aug 27 22:46:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:46:32 2012] Initial guess for spatial extent in simple fitting = 14.01"
[Mon Aug 27 22:46:32 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.011
[Mon Aug 27 22:46:32 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 14.01"
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26.ximg exists
[Tue Aug 28 01:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26.csv
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Aug 28 01:11:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26.csv
[Tue Aug 28 01:11:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 01:11:32 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Aug 28 01:11:32 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Aug 28 01:11:32 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Aug 28 02:32:24 2012] Warning, spatial fit 26 centroid is now closest to src. 18
[Tue Aug 28 02:32:24 2012] Source 32 is offset by -4.505977 and -2.098368 pixels which is larger than
2 X fitted extent = 2.145140 x 2.145140, not incorporating fit results
[Tue Aug 28 02:32:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:24 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 02:32:24 2012] Source does appear to be extended
[Tue Aug 28 02:32:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:42:22 2012] XMMSAS src. selection expression = ellipse(27520.846000, 25906.602000, 840.702024, 840.702024, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing source region out to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32_src.reg
[Tue Aug 28 02:42:22 2012] Extracting stamp from image fullrun_mos1_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (269, 250) - (365, 347)
[Tue Aug 28 02:42:22 2012] XMMSAS bgd. selection expression = annulus(27520.846000, 25906.602000, 1401.170040, 2802.340081, X, Y) && !ellipse(32922.035400, 27532.236000, 2924.480084, 2924.480084, 0.000000, X, Y) && !ellipse(30692.833710, 25447.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.853200, 26997.782160, 939.400027, 939.400027, 0.000000, X, Y) && !ellipse(32570.296000, 27399.832000, 3133.504090, 3133.504090, 0.000000, X, Y) && !ellipse(28250.522705, 26660.133606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26254.221800, 26560.735400, 791.800823, 791.800823, 0.000000, X, Y) && !ellipse(28470.084000, 26354.312000, 2382.704069, 2382.704069, 0.000000, X, Y) && !ellipse(31239.278200, 28985.478000, 1462.240042, 1462.240042, 0.000000, X, Y) && !ellipse(27720.112000, 25856.344000, 1081.080031, 1081.080031, 0.000000, X, Y) && !ellipse(26121.680000, 26619.408000, 1126.184032, 1126.184032, 0.000000, X, Y) && !ellipse(29172.362152, 25452.814789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.328522, 26650.410889, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32.gif
[Tue Aug 28 02:52:13 2012] Mean detx,y = (-2276.58, -2770.16) 
[Tue Aug 28 02:52:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:52:25 2012] grppha failed
[Tue Aug 28 02:52:25 2012] Setting source spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32_src.pi.gz
[Tue Aug 28 02:52:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Aug 28 02:53:34 2012] Not generating rmf since there are only 81 counts
[Tue Aug 28 02:53:34 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32_src.pi.gz
[Tue Aug 28 03:00:50 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:52 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Tue Aug 28 03:00:52 2012] Flag c found in src. 32 procflags, skipping spectral fitting
[Tue Aug 28 03:00:52 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Aug 28 03:00:53 2012] xmm0153752401/analysis//spectral/fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete