[Mon Aug 27 16:09:25 2012] Detection parameters:
  Position = (353.3, 293.1) = 2 5 40.66 64 48 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.3 +/- 22.9
  Background counts = 31.7
  Rate = 0.02 +/- 0.001

[Mon Aug 27 16:09:26 2012] Off-axis axis estimate = 4.00'
[Mon Aug 27 17:22:28 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:22:28 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Mon Aug 27 17:22:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841
[Mon Aug 27 17:22:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.43"
[Mon Aug 27 19:37:05 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Aug 27 19:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 19:37:05 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Aug 27 19:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3.csv
[Mon Aug 27 19:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Aug 27 19:37:06 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Aug 27 22:03:07 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Mon Aug 27 22:03:07 2012] Source 2 is offset by -6.299107 and -4.393807 pixels which is larger than
2 X fitted extent = 1.169030 x 1.169030, not incorporating fit results
[Mon Aug 27 22:03:07 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:07 2012] Assessing source extent using major
[Mon Aug 27 22:03:07 2012] Source does appear to be extended
[Mon Aug 27 22:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:46:32 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:46:32 2012] Initial guess for spatial extent in simple fitting = 8.43"
[Mon Aug 27 22:46:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841
[Mon Aug 27 22:46:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.43"
[Tue Aug 28 01:11:30 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug 28 01:11:30 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug 28 01:11:30 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug 28 01:11:31 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug 28 02:32:24 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Tue Aug 28 02:32:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:24 2012] Assessing source extent using major
[Tue Aug 28 02:32:24 2012] Source does appear to be extended
[Tue Aug 28 02:32:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:42:22 2012] XMMSAS src. selection expression = ellipse(30692.833710, 25447.334808, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing source region out to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 28 02:42:22 2012] Extracting stamp from image fullrun_mos1_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (316, 256) - (391, 331)
[Tue Aug 28 02:42:22 2012] XMMSAS bgd. selection expression = annulus(30692.833710, 25447.334808, 1087.500000, 2175.000000, X, Y) && !ellipse(31024.406000, 26826.988000, 387.340011, 387.340011, 0.000000, X, Y) && !ellipse(32922.035400, 27532.236000, 2924.480084, 2924.480084, 0.000000, X, Y) && !ellipse(28835.853200, 26997.782160, 939.400027, 939.400027, 0.000000, X, Y) && !ellipse(31907.525543, 24897.988007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.296000, 27399.832000, 3133.504090, 3133.504090, 0.000000, X, Y) && !ellipse(31757.012000, 28074.562000, 614.874418, 614.874418, 0.000000, X, Y) && !ellipse(28250.522705, 26660.133606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33108.111206, 26319.647339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.084000, 26354.312000, 2382.704069, 2382.704069, 0.000000, X, Y) && !ellipse(31239.278200, 28985.478000, 1462.240042, 1462.240042, 0.000000, X, Y) && !ellipse(32792.165375, 25615.398163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27720.112000, 25856.344000, 1081.080031, 1081.080031, 0.000000, X, Y) && !ellipse(34061.282400, 25769.290000, 1566.752045, 1566.752045, 0.000000, X, Y) && !ellipse(29172.362152, 25452.814789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.845276, 25416.799316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.846000, 25906.602000, 1120.936032, 1120.936032, 0.000000, X, Y) && !ellipse(32803.770508, 28290.079987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.742188, 28471.099884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33700.126984, 27991.219269, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2.gif
[Tue Aug 28 02:44:20 2012] Mean detx,y = (-3316.98, -5781.69) 
[Tue Aug 28 02:44:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:44:36 2012] grppha failed
[Tue Aug 28 02:44:36 2012] Setting source spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 02:44:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 28 02:53:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 02:53:32 2012] rmf not generated due to insufficient counts
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 03:00:50 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 03:00:53 2012] xmm0153752401/analysis//spectral/fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete