[Mon Aug 27 16:09:25 2012] Detection parameters:
  Position = (357.4, 308.9) = 2 5 37.89 64 49 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4654.2 +/- 81.7
  Background counts = 35.2
  Rate = 0.3 +/- 0.005

[Mon Aug 27 16:09:26 2012] Off-axis axis estimate = 4.34'
[Mon Aug 27 17:22:28 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 17:22:28 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Mon Aug 27 17:22:28 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Mon Aug 27 17:22:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.60"
[Mon Aug 27 19:37:05 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 19:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 19:37:05 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 19:37:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 19:37:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 19:37:06 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 19:37:06 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 22:03:07 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon Aug 27 22:03:07 2012] Source 1 is offset by 0.874098 and 7.171522 pixels which is larger than
2 X fitted extent = 5.643081 x 5.643081, not incorporating fit results
[Mon Aug 27 22:03:07 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 22:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 22:03:07 2012] Assessing source extent using major
[Mon Aug 27 22:03:07 2012] Source does appear to be extended
[Mon Aug 27 22:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 22:46:32 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:46:32 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Mon Aug 27 22:46:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Mon Aug 27 22:46:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.60"
[Tue Aug 28 01:11:30 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 01:11:30 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 01:11:30 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 01:11:31 2012] fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 01:11:31 2012] Fit fullrun_mos1_xmm0153752401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 02:32:24 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Tue Aug 28 02:32:24 2012] Spatial fit model total counts = 3151.210000, observed total counts = 2732.000000
[Tue Aug 28 02:32:24 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 28 02:32:24 2012] Source 1 is offset by 0.883110 and 7.171522 pixels which is larger than
2 X fitted extent = 5.469609 x 5.469609, not incorporating fit results
[Tue Aug 28 02:32:24 2012] Spatial fit model total counts = 7245.070000, observed total counts = 7077.000000
[Tue Aug 28 02:32:24 2012] Offset between fit and detection position for source 1 = 0.214744 pixels
[Tue Aug 28 02:32:24 2012] Warning, changing simple spatial fit ID from 1 to 7
[Tue Aug 28 02:32:24 2012] 5830.450000 total counts/ 4551.890000 bgd. counts: snr = 18.950699
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.214744 pixels
  Position = (357.2, 308.9) = 2 5 38.04 64 49 40.2
  Extent = 4.8 (4.6-5.2)", rotation angle = 0
  Source counts = 1278.6 +/- 76.4
  Background counts = 4551.9
  Rate = 0.06 +/- 0.004
[Tue Aug 28 02:32:24 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 02:32:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 02:32:24 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 02:32:24 2012] Source does appear to be extended
[Tue Aug 28 02:32:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:32:24 2012] Source is confused with source 3
[Tue Aug 28 02:32:24 2012] Source is confused with source 10
[Tue Aug 28 02:42:22 2012] Counts = 1278.560000, rescaling region sizes by 2.000000
[Tue Aug 28 02:42:22 2012] XMMSAS src. selection expression = ellipse(31024.406000, 26826.988000, 581.010017, 581.010017, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing source region out to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 02:42:22 2012] Extracting stamp from image fullrun_mos1_xmm0153752401_pi300-10000_cl_sm2.00.img.gz, (324, 276) - (391, 342)
[Tue Aug 28 02:42:22 2012] XMMSAS bgd. selection expression = annulus(31024.406000, 26826.988000, 1936.700056, 3873.400111, X, Y) && !ellipse(32922.035400, 27532.236000, 2924.480084, 2924.480084, 0.000000, X, Y) && !ellipse(30692.833710, 25447.334808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.853200, 26997.782160, 939.400027, 939.400027, 0.000000, X, Y) && !ellipse(31907.525543, 24897.988007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.296000, 27399.832000, 3133.504090, 3133.504090, 0.000000, X, Y) && !ellipse(31757.012000, 28074.562000, 614.874418, 614.874418, 0.000000, X, Y) && !ellipse(28250.522705, 26660.133606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33108.111206, 26319.647339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.084000, 26354.312000, 2382.704069, 2382.704069, 0.000000, X, Y) && !ellipse(33924.697200, 26039.837600, 920.088026, 920.088026, 0.000000, X, Y) && !ellipse(31239.278200, 28985.478000, 1462.240042, 1462.240042, 0.000000, X, Y) && !ellipse(32792.165375, 25615.398163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27720.112000, 25856.344000, 1081.080031, 1081.080031, 0.000000, X, Y) && !ellipse(34831.026080, 26848.544200, 1627.288047, 1627.288047, 0.000000, X, Y) && !ellipse(34061.282400, 25769.290000, 1566.752045, 1566.752045, 0.000000, X, Y) && !ellipse(26121.680000, 26619.408000, 1126.184032, 1126.184032, 0.000000, X, Y) && !ellipse(29172.362152, 25452.814789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32085.845276, 25416.799316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.846000, 25906.602000, 1120.936032, 1120.936032, 0.000000, X, Y) && !ellipse(32803.770508, 28290.079987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.328522, 26650.410889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32397.742188, 28471.099884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33700.126984, 27991.219269, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:42:22 2012] Writing fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 02:42:25 2012] Mean detx,y = (-4631.65, -5430.13) 
[Tue Aug 28 02:42:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:42:39 2012] grppha failed
[Tue Aug 28 02:42:40 2012] Setting source spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 02:42:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 03:00:50 2012] Updating aperture counts using extracted products
[Tue Aug 28 03:00:50 2012] Error reading totcts from fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 03:00:50 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 03:00:52 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Aug 28 03:00:52 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Aug 28 03:00:52 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Aug 28 03:00:52 2012] Source 1 has no response, skipping
[Tue Aug 28 03:00:53 2012] xmm0153752401/analysis//spectral/fullrun_mos1_xmm0153752401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete