[Fri May 17 02:59:04 2013] Detection parameters:
  Position = (292.9, 221.4) = 2 5 40.24 64 50 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2251.7 +/- 63.4
  Background counts = 166.2
  Rate = 0.1 +/- 0.003

[Fri May 17 02:59:06 2013] Off-axis axis estimate = 5.60'
[Fri May 17 03:04:46 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri May 17 03:04:46 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Fri May 17 03:04:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.801
[Fri May 17 03:04:46 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.23"
[Fri May 17 05:41:41 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 17 05:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3.csv
[Fri May 17 05:41:41 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 17 05:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3.csv
[Fri May 17 05:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 17 05:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:08 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri May 17 12:09:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:08 2013] Assessing source extent using major
[Fri May 17 12:09:08 2013] Source does appear to be extended
[Fri May 17 12:09:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:36 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:09:36 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Fri May 17 12:09:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.801
[Fri May 17 12:09:36 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.23"
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3.csv
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3.csv
[Fri May 17 14:16:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 17 14:16:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:44 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri May 17 20:37:44 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:44 2013] Assessing source extent using major
[Fri May 17 20:37:44 2013] Source does appear to be extended
[Fri May 17 20:37:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 20:38:09 2013] Counts = 2251.661377, rescaling region sizes by 2.000000
[Fri May 17 20:38:09 2013] XMMSAS src. selection expression = ellipse(25430.547058, 19217.325821, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 17 20:38:09 2013] Writing source region out to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_src.reg
[Fri May 17 20:38:09 2013] Extracting stamp from image fullrun_pn_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (218, 146) - (368, 296)
[Fri May 17 20:38:09 2013] XMMSAS bgd. selection expression = annulus(25430.547058, 19217.325821, 4350.000000, 8700.000000, X, Y) && !ellipse(25742.398834, 18605.076065, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25365.869000, 25227.143000, 427.136012, 427.136012, 0.000000, X, Y) && !ellipse(33439.796051, 24375.393280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18803.992200, 24114.794400, 462.164712, 462.164712, 0.000000, X, Y) && !ellipse(27149.936066, 21522.063828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.201843, 21273.837173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.501160, 20569.120712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29916.152679, 20223.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.823883, 20081.227219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23186.720000, 19137.366000, 1564.592045, 812.960023, 330.074200, X, Y) && !ellipse(29132.236694, 19328.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23309.896000, 19078.476000, 1517.112044, 1517.112044, 0.000000, X, Y) && !ellipse(21725.060000, 19331.416600, 1514.984044, 1514.984044, 0.000000, X, Y) && !ellipse(22647.563934, 18569.201309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29459.909790, 18826.845352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.213013, 18408.387512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.885010, 18302.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.850281, 18104.178238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21436.446000, 17995.432000, 1585.568046, 1585.568046, 0.000000, X, Y) && !ellipse(27675.374329, 17615.504166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.169140, 17785.040000, 934.744027, 512.274415, 359.384718, X, Y) && !ellipse(23305.430000, 18163.126000, 1559.736045, 925.832027, 155.292000, X, Y) && !ellipse(27512.140472, 17200.147400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26664.302002, 16899.098938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24912.179138, 16847.149307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.098938, 16542.499298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27085.944550, 10337.375900, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 20:38:09 2013] Writing fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3.gif
[Fri May 17 20:45:43 2013] Mean detx,y = (-6046.96, -3383.36) 
[Fri May 17 20:45:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 20:47:56 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 20:47:57 2013] Setting source spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 17 20:47:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 17 21:13:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 21:13:39 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:34 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:34 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 30514.00
[Fri May 17 23:23:34 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 18343.00
[Fri May 17 23:23:34 2013] Got source and background scale factors 4710785.000000, 128507285.000000
[Fri May 17 23:23:34 2013] User source parameters:
  Position = (292.9, 221.4) = 2 5 40.24 64 50 7.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29841.6 +/- 175.7
  Background aperture counts = 672.4
  Rate = 1 +/- 0.007

[Fri May 17 23:23:34 2013] Updating counts from extracted products
[Fri May 17 23:23:34 2013] Set source signif. to 29841.59/25.93 = 1150.81
[Fri May 17 23:23:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:41 2013] Using photon index=1.80, rate=1.15, arf fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3.arf
[Fri May 17 23:23:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:41 2013] Updating source flux to 8.1e-12
[Fri May 17 23:24:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:12 2013] xmm0153752001/analysis//spectral/fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete