[Fri May 17 02:59:05 2013] Detection parameters:
  Position = (326.8, 210.9) = 2 5 17.07 64 49 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.8 +/- 24.8
  Background counts = 149.2
  Rate = 0.01 +/- 0.002

[Fri May 17 02:59:06 2013] Off-axis axis estimate = 6.67'
[Fri May 17 03:04:46 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Fri May 17 03:04:46 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Fri May 17 03:04:46 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195
[Fri May 17 03:04:46 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.76"
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28.csv
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28.csv
[Fri May 17 05:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 05:41:43 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May 17 05:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 17 05:41:43 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May 17 05:41:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 17 05:41:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:08 2013] Warning, spatial fit 28 centroid is now closest to src. 22
[Fri May 17 12:09:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:08 2013] Assessing source extent using major
[Fri May 17 12:09:08 2013] Source does appear to be extended
[Fri May 17 12:09:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:08 2013] Source is confused with source 29
[Fri May 17 12:09:08 2013] Source is confused with source 32
[Fri May 17 12:09:36 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:09:36 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Fri May 17 12:09:36 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.195
[Fri May 17 12:09:36 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 9.76"
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26.csv
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26.csv
[Fri May 17 14:16:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:16:28 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May 17 14:16:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May 17 14:16:28 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May 17 14:16:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri May 17 14:16:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:44 2013] Warning, spatial fit 26 centroid is now closest to src. 32
[Fri May 17 20:37:44 2013] Source 28 is offset by 1.328402 and 4.287087 pixels which is larger than
2 X fitted extent = 1.509775 x 1.509775, not incorporating fit results
[Fri May 17 20:37:44 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:44 2013] Assessing source extent using major
[Fri May 17 20:37:44 2013] Source does appear to be extended
[Fri May 17 20:37:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 20:38:10 2013] XMMSAS src. selection expression = ellipse(28386.885010, 18302.584595, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 20:38:10 2013] Writing source region out to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_src.reg
[Fri May 17 20:38:10 2013] Extracting stamp from image fullrun_pn_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (289, 173) - (364, 248)
[Fri May 17 20:38:10 2013] XMMSAS bgd. selection expression = annulus(28386.885010, 18302.584595, 1087.500000, 2175.000000, X, Y) && !ellipse(25742.398834, 18605.076065, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25430.547058, 19217.325821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.201843, 21273.837173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.501160, 20569.120712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29916.152679, 20223.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.823883, 20081.227219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29132.236694, 19328.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29459.909790, 18826.845352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.850281, 18104.178238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.374329, 17615.504166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.169140, 17785.040000, 934.744027, 512.274415, 359.384718, X, Y) && !ellipse(27512.140472, 17200.147400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26664.302002, 16899.098938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.098938, 16542.499298, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 20:38:10 2013] Writing fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28.gif
[Fri May 17 21:04:30 2013] Mean detx,y = (-8459.37, -1814.67) 
[Fri May 17 21:04:34 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:04:51 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:04:51 2013] Setting source spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri May 17 21:04:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri May 17 21:32:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 21:32:38 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:38 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:38 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 1412.00
[Fri May 17 23:23:38 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_bgd.pi.gz = 792.00
[Fri May 17 23:23:39 2013] Got source and background scale factors 1105728.000000, 2836806.000000
[Fri May 17 23:23:39 2013] User source parameters:
  Position = (326.8, 210.9) = 2 5 17.07 64 49 22.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1103.3 +/- 38.6
  Background aperture counts = 308.7
  Rate = 0.04 +/- 0.001

[Fri May 17 23:23:39 2013] Updating counts from extracted products
[Fri May 17 23:23:39 2013] Set source signif. to 1103.29/17.57 = 62.79
[Fri May 17 23:23:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:41 2013] Using photon index=1.80, rate=0.0423, arf fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28.arf
[Fri May 17 23:23:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:41 2013] Updating source flux to 3.7e-13
[Fri May 17 23:24:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:12 2013] xmm0153752001/analysis//spectral/fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete