[Fri May 17 02:59:05 2013] Detection parameters:
  Position = (318.9, 237.0) = 2 5 22.48 64 51 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.8 +/- 18.8
  Background counts = 143.5
  Rate = 0.006 +/- 0.001

[Fri May 17 02:59:06 2013] Off-axis axis estimate = 4.70'
[Fri May 17 03:04:46 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Fri May 17 03:04:46 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Fri May 17 03:04:46 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.789
[Fri May 17 03:04:46 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.78"
[Fri May 17 05:41:41 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17.ximg exists
[Fri May 17 05:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17.csv
[Fri May 17 05:41:41 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May 17 05:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17.csv
[Fri May 17 05:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 17 05:41:42 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 17 05:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17.csv
[Fri May 17 05:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:08 2013] Source 17 is offset by -7.185113 and -5.740819 pixels which is larger than
2 X fitted extent = 1.008772 x 1.008772, not incorporating fit results
[Fri May 17 12:09:08 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:08 2013] Assessing source extent using major
[Fri May 17 12:09:08 2013] Source does appear to be extended
[Fri May 17 12:09:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:08 2013] Source is confused with source 20
[Fri May 17 12:09:36 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Fri May 17 12:09:36 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Fri May 17 12:09:36 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.789
[Fri May 17 12:09:36 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.78"
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16.csv
[Fri May 17 14:16:27 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May 17 14:16:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16.csv
[Fri May 17 14:16:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 14:16:28 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May 17 14:16:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 17 14:16:28 2013] fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May 17 14:16:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 17 14:16:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:44 2013] Warning, spatial fit 16 centroid is now closest to src. 13
[Fri May 17 20:37:44 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:44 2013] Assessing source extent using major
[Fri May 17 20:37:44 2013] Source does appear to be extended
[Fri May 17 20:37:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 20:38:09 2013] XMMSAS src. selection expression = ellipse(27694.501160, 20569.120712, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 20:38:09 2013] Writing source region out to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_src.reg
[Fri May 17 20:38:09 2013] Extracting stamp from image fullrun_pn_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (281, 199) - (356, 274)
[Fri May 17 20:38:09 2013] XMMSAS bgd. selection expression = annulus(27694.501160, 20569.120712, 1087.500000, 2175.000000, X, Y) && !ellipse(25742.398834, 18605.076065, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25430.547058, 19217.325821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.936066, 21522.063828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25980.201843, 21273.837173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29916.152679, 20223.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28066.823883, 20081.227219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29132.236694, 19328.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29459.909790, 18826.845352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.885010, 18302.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27875.850281, 18104.178238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.374329, 17615.504166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.169140, 17785.040000, 934.744027, 512.274415, 359.384718, X, Y)
[Fri May 17 20:38:09 2013] Writing fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17.gif
[Fri May 17 20:56:51 2013] Mean detx,y = (-6309.35, -769.86) 
[Fri May 17 20:56:55 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 20:57:14 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 20:57:14 2013] Setting source spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri May 17 20:57:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri May 17 21:22:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 21:22:17 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:36 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:36 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 922.00
[Fri May 17 23:23:37 2013] Total counts from fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_bgd.pi.gz = 609.00
[Fri May 17 23:23:37 2013] Got source and background scale factors 1035062.000000, 2913600.000000
[Fri May 17 23:23:37 2013] User source parameters:
  Position = (318.9, 237.0) = 2 5 22.48 64 51 10.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 705.7 +/- 31.4
  Background aperture counts = 216.3
  Rate = 0.03 +/- 0.001

[Fri May 17 23:23:37 2013] Updating counts from extracted products
[Fri May 17 23:23:37 2013] Set source signif. to 705.65/14.71 = 47.97
[Fri May 17 23:23:41 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:41 2013] Using photon index=1.80, rate=0.0271, arf fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17.arf
[Fri May 17 23:23:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:41 2013] Updating source flux to 2.2e-13
[Fri May 17 23:24:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:12 2013] xmm0153752001/analysis//spectral/fullrun_pn_xmm0153752001_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete