[Fri May 17 03:00:55 2013] Detection parameters:
  Position = (278.7, 192.7) = 2 5 49.89 64 48 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 14.0
  Background counts = 38.9
  Rate = 0.002 +/- 0.0004

[Fri May 17 03:00:55 2013] Off-axis axis estimate = 7.80'
[Fri May 17 08:51:31 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri May 17 08:51:31 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Fri May 17 08:51:31 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.666
[Fri May 17 08:51:31 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 10.33"
[Fri May 17 12:08:59 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39.ximg exists
[Fri May 17 12:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39.csv
[Fri May 17 12:08:59 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri May 17 12:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39.csv
[Fri May 17 12:08:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:00 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri May 17 12:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri May 17 12:09:00 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri May 17 12:09:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39.csv
[Fri May 17 12:09:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:25 2013] Warning, spatial fit 39 centroid is now closest to src. 10
[Fri May 17 12:09:25 2013] Source 43 is offset by 4.195263 and -0.818530 pixels which is larger than
2 X fitted extent = 1.167310 x 1.716446, not incorporating fit results
[Fri May 17 12:09:25 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:25 2013] Assessing source extent using major
[Fri May 17 12:09:25 2013] Source does appear to be extended
[Fri May 17 12:09:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:25 2013] Source is confused with source 44
[Fri May 17 17:14:07 2013] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri May 17 17:14:07 2013] Initial guess for spatial extent in simple fitting = 10.33"
[Fri May 17 17:14:07 2013] source mask rpix=2.4, npix_max = 33, mask sum = 22, frac = 0.666
[Fri May 17 17:14:07 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 10.33"
[Fri May 17 20:37:34 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38.ximg exists
[Fri May 17 20:37:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38.csv
[Fri May 17 20:37:34 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri May 17 20:37:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38.csv
[Fri May 17 20:37:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:35 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri May 17 20:37:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 17 20:37:35 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri May 17 20:37:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri May 17 20:37:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:58 2013] Warning, spatial fit 38 centroid is now closest to src. 38
[Fri May 17 20:37:58 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:58 2013] Assessing source extent using major
[Fri May 17 20:37:58 2013] Source does appear to be extended
[Fri May 17 20:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:31:25 2013] XMMSAS src. selection expression = ellipse(24197.755890, 16718.337906, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 22:31:25 2013] Writing source region out to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_src.reg
[Fri May 17 22:31:25 2013] Extracting stamp from image fullrun_mos2_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (241, 155) - (316, 230)
[Fri May 17 22:31:25 2013] XMMSAS bgd. selection expression = annulus(24197.755890, 16718.337906, 1087.500000, 2175.000000, X, Y) && !ellipse(26306.287231, 18520.202744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25955.483521, 18170.612381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25432.875519, 19301.065445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25269.222168, 18426.470917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27684.284000, 19079.652000, 1558.776045, 1558.776045, 0.000000, X, Y) && !ellipse(26648.220490, 19737.367737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26459.088000, 17093.162000, 1649.824047, 1649.824047, 0.000000, X, Y) && !ellipse(25771.447000, 17547.038000, 1454.264042, 1454.264042, 0.000000, X, Y) && !ellipse(27747.341000, 18977.634200, 1438.528041, 810.656023, 209.631000, X, Y) && !ellipse(24490.132000, 18779.936400, 1519.800044, 1519.800044, 0.000000, X, Y) && !ellipse(25283.226000, 16807.972000, 1677.128048, 1677.128048, 0.000000, X, Y) && !ellipse(23144.743200, 19152.633200, 1067.848031, 648.852819, 116.524000, X, Y) && !ellipse(24677.047089, 17818.136002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.416656, 16501.923813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22632.405400, 18999.312000, 1534.016044, 841.704024, 46.061200, X, Y) && !ellipse(21583.644577, 19047.199509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.880829, 16239.143616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.937531, 17208.185501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21801.234848, 18028.286880, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:31:25 2013] Writing fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43.gif
[Fri May 17 22:43:57 2013] Mean detx,y = (7011.72, 5587.91) 
[Fri May 17 22:43:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:44:14 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:44:15 2013] Setting source spectrum file to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri May 17 22:44:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri May 17 23:21:38 2013] Not generating rmf since there are only 75 counts
[Fri May 17 23:21:38 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:52 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:52 2013] Total counts from fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 359.00
[Fri May 17 23:23:52 2013] Total counts from fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_bgd.pi.gz = 426.00
[Fri May 17 23:23:52 2013] Got source and background scale factors 970534.000000, 3906634.000000
[Fri May 17 23:23:52 2013] User source parameters:
  Position = (278.7, 192.7) = 2 5 49.89 64 48 0.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 253.2 +/- 20.0
  Background aperture counts = 105.8
  Rate = 0.008 +/- 0.0006

[Fri May 17 23:23:52 2013] Updating counts from extracted products
[Fri May 17 23:23:52 2013] Set source signif. to 253.17/10.29 = 24.61
[Fri May 17 23:23:53 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:53 2013] Using photon index=1.80, rate=0.00823, arf fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43.arf
[Fri May 17 23:23:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:53 2013] Updating source flux to 3.1e-13
[Fri May 17 23:24:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:07 2013] xmm0153752001/analysis//spectral/fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete