[Fri May 17 03:00:52 2013] Detection parameters:
  Position = (302.9, 213.4) = 2 5 33.37 64 49 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 935.7 +/- 38.8
  Background counts = 51.7
  Rate = 0.05 +/- 0.002

[Fri May 17 03:00:55 2013] Off-axis axis estimate = 6.17'
[Fri May 17 08:51:31 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri May 17 08:51:31 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Fri May 17 08:51:31 2013] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.762
[Fri May 17 08:51:31 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.51"
[Fri May 17 12:08:58 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 17 12:08:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2.csv
[Fri May 17 12:08:58 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 17 12:08:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2.csv
[Fri May 17 12:08:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:08:59 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 17 12:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 17 12:08:59 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 17 12:08:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 17 12:08:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:25 2013] Warning, spatial fit 2 centroid is now closest to src. 5
[Fri May 17 12:09:25 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:25 2013] Assessing source extent using major
[Fri May 17 12:09:25 2013] Source does appear to be extended
[Fri May 17 12:09:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:25 2013] Source is confused with source 4
[Fri May 17 17:14:07 2013] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Fri May 17 17:14:07 2013] Initial guess for spatial extent in simple fitting = 9.51"
[Fri May 17 17:14:07 2013] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.762
[Fri May 17 17:14:07 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.51"
[Fri May 17 20:37:33 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 17 20:37:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1.csv
[Fri May 17 20:37:33 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 17 20:37:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1.csv
[Fri May 17 20:37:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:34 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 17 20:37:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 20:37:34 2013] fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 17 20:37:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May 17 20:37:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:58 2013] Spatial fit model total counts = 10135.700000, observed total counts = 7639.000000
[Fri May 17 20:37:58 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 20:37:58 2013] Source 3 is offset by -7.251572 and 3.894951 pixels which is larger than
2 X fitted extent = 9.156552 x 1.144570, not incorporating fit results
[Fri May 17 20:37:58 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:58 2013] Assessing source extent using major
[Fri May 17 20:37:58 2013] Source does appear to be extended
[Fri May 17 20:37:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 22:31:24 2013] XMMSAS src. selection expression = ellipse(26306.287231, 18520.202744, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 22:31:24 2013] Writing source region out to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_src.reg
[Fri May 17 22:31:24 2013] Extracting stamp from image fullrun_mos2_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (265, 176) - (340, 251)
[Fri May 17 22:31:24 2013] XMMSAS bgd. selection expression = annulus(26306.287231, 18520.202744, 1087.500000, 2175.000000, X, Y) && !ellipse(25955.483521, 18170.612381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25432.875519, 19301.065445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25269.222168, 18426.470917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27684.284000, 19079.652000, 1558.776045, 1558.776045, 0.000000, X, Y) && !ellipse(26648.220490, 19737.367737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26459.088000, 17093.162000, 1649.824047, 1649.824047, 0.000000, X, Y) && !ellipse(25771.447000, 17547.038000, 1454.264042, 1454.264042, 0.000000, X, Y) && !ellipse(27747.341000, 18977.634200, 1438.528041, 810.656023, 209.631000, X, Y) && !ellipse(24490.132000, 18779.936400, 1519.800044, 1519.800044, 0.000000, X, Y) && !ellipse(25283.226000, 16807.972000, 1677.128048, 1677.128048, 0.000000, X, Y) && !ellipse(23144.743200, 19152.633200, 1067.848031, 648.852819, 116.524000, X, Y) && !ellipse(27951.866425, 19794.056595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29080.720000, 18925.002000, 1515.456044, 602.054417, 18.135100, X, Y) && !ellipse(24677.047089, 17818.136002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29378.934000, 18684.200000, 1588.960046, 390.853611, 224.643000, X, Y) && !ellipse(28465.846400, 17811.856400, 773.428822, 371.414411, 351.725820, X, Y) && !ellipse(26875.416656, 16501.923813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.047363, 17613.866013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27962.680359, 18230.406296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22632.405400, 18999.312000, 1534.016044, 841.704024, 46.061200, X, Y) && !ellipse(28393.336731, 18479.263519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.361511, 19710.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26206.661600, 21610.928000, 1338.064039, 682.813620, 330.249334, X, Y) && !ellipse(24910.880829, 16239.143616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24197.755890, 16718.337906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23867.937531, 17208.185501, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 22:31:24 2013] Writing fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3.gif
[Fri May 17 22:31:28 2013] Mean detx,y = (6810.65, 3079.89) 
[Fri May 17 22:31:29 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 22:31:42 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 22:31:42 2013] Setting source spectrum file to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 17 22:31:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 17 22:45:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 22:45:28 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:46 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:46 2013] Total counts from fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 4360.00
[Fri May 17 23:23:46 2013] Total counts from fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 490.00
[Fri May 17 23:23:46 2013] Got source and background scale factors 1054736.000000, 492800.000000
[Fri May 17 23:23:46 2013] User source parameters:
  Position = (302.9, 213.4) = 2 5 33.37 64 49 32.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3311.3 +/- 67.0
  Background aperture counts = 1048.7
  Rate = 0.1 +/- 0.002

[Fri May 17 23:23:46 2013] Updating counts from extracted products
[Fri May 17 23:23:46 2013] Set source signif. to 3311.26/32.38 = 102.25
[Fri May 17 23:23:52 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:52 2013] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3.arf
[Fri May 17 23:23:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:52 2013] Updating source flux to 3.1e-12
[Fri May 17 23:24:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:07 2013] xmm0153752001/analysis//spectral/fullrun_mos2_xmm0153752001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete