[Fri May 17 02:59:50 2013] Detection parameters:
  Position = (292.6, 199.1) = 2 5 40.39 64 48 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 319.3 +/- 25.9
  Background counts = 53.4
  Rate = 0.02 +/- 0.001

[Fri May 17 02:59:52 2013] Off-axis axis estimate = 7.22'
[Fri May 17 05:41:43 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri May 17 05:41:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 05:41:43 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Fri May 17 05:41:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.952
[Fri May 17 05:41:43 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.04"
[Fri May 17 08:51:29 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 17 08:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5.csv
[Fri May 17 08:51:29 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 17 08:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5.csv
[Fri May 17 08:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 17 08:51:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:16 2013] Warning, spatial fit 5 centroid is now closest to src. 1
[Fri May 17 12:09:16 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:16 2013] Assessing source extent using major
[Fri May 17 12:09:16 2013] Source does appear to be extended
[Fri May 17 12:09:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:16 2013] Source is confused with source 3
[Fri May 17 14:16:28 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri May 17 14:16:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 17 14:16:28 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Fri May 17 14:16:28 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.952
[Fri May 17 14:16:28 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.04"
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5.csv
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5.csv
[Fri May 17 17:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 17 17:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:51 2013] Warning, spatial fit 5 centroid is now closest to src. 1
[Fri May 17 20:37:51 2013] Source 4 is offset by -1.718104 and 0.375380 pixels which is larger than
2 X fitted extent = 1.172492 x 6.081104, not incorporating fit results
[Fri May 17 20:37:51 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:51 2013] Assessing source extent using major
[Fri May 17 20:37:51 2013] Source does appear to be extended
[Fri May 17 20:37:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:41:30 2013] XMMSAS src. selection expression = ellipse(25410.944977, 17272.096039, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:41:30 2013] Writing source region out to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_src.reg
[Fri May 17 21:41:30 2013] Extracting stamp from image fullrun_mos1_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (255, 162) - (330, 237)
[Fri May 17 21:41:30 2013] XMMSAS bgd. selection expression = annulus(25410.944977, 17272.096039, 1087.500000, 2175.000000, X, Y) && !ellipse(25608.593323, 18928.783875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.856000, 18152.570000, 1602.136046, 1602.136046, 0.000000, X, Y) && !ellipse(25900.434143, 17354.736481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27308.398834, 19154.442780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26645.347748, 17342.983994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23654.605000, 18235.265800, 954.264027, 954.264027, 0.000000, X, Y) && !ellipse(26806.522000, 16798.498000, 1570.880045, 1570.880045, 0.000000, X, Y) && !ellipse(26975.991821, 20213.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23570.059174, 19094.809494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.305600, 19966.808000, 1381.384040, 1381.384040, 0.000000, X, Y) && !ellipse(24759.172455, 16988.311905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27998.066589, 19340.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28039.386810, 19848.070511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23517.986084, 19606.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.340000, 17698.522000, 1585.312046, 1585.312046, 0.000000, X, Y) && !ellipse(28478.908000, 18896.944200, 1536.016044, 1536.016044, 0.000000, X, Y) && !ellipse(27167.501740, 17608.129822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.288147, 17875.491272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.846000, 18505.002800, 3299.520095, 2536.440073, -0.000000, X, Y)
[Fri May 17 21:41:30 2013] Writing fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4.gif
[Fri May 17 21:44:19 2013] Mean detx,y = (4653.18, -7517.57) 
[Fri May 17 21:44:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:44:35 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:44:35 2013] Setting source spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 17 21:44:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 17 21:58:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 21:58:47 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:42 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:42 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1425.00
[Fri May 17 23:23:42 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_bgd.pi.gz = 261.00
[Fri May 17 23:23:42 2013] Got source and background scale factors 1243414.000000, 1987338.000000
[Fri May 17 23:23:42 2013] User source parameters:
  Position = (292.6, 199.1) = 2 5 40.39 64 48 30.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1261.7 +/- 38.8
  Background aperture counts = 163.3
  Rate = 0.04 +/- 0.001

[Fri May 17 23:23:42 2013] Updating counts from extracted products
[Fri May 17 23:23:42 2013] Set source signif. to 1261.70/12.78 = 98.73
[Fri May 17 23:23:46 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:46 2013] Using photon index=1.80, rate=0.0413, arf fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4.arf
[Fri May 17 23:23:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:46 2013] Updating source flux to 9.7e-13
[Fri May 17 23:23:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:01 2013] xmm0153752001/analysis//spectral/fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete