[Fri May 17 02:59:52 2013] Detection parameters:
  Position = (253.3, 206.4) = 2 6 7.18 64 49 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 12.5
  Background counts = 35.6
  Rate = 0.004 +/- 0.0007

[Fri May 17 02:59:52 2013] Off-axis axis estimate = 7.43'
[Fri May 17 05:41:43 2013] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Fri May 17 05:41:43 2013] Initial guess for spatial extent in simple fitting = 10.14"
[Fri May 17 05:41:43 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.842
[Fri May 17 05:41:43 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.14"
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24.csv
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24.csv
[Fri May 17 08:51:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 08:51:31 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 17 08:51:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 17 08:51:31 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 17 08:51:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 17 08:51:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:16 2013] Warning, spatial fit 24 centroid is now closest to src. 35
[Fri May 17 12:09:16 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:16 2013] Assessing source extent using major
[Fri May 17 12:09:16 2013] Source does appear to be extended
[Fri May 17 12:09:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:16 2013] Source is confused with source 35
[Fri May 17 12:09:16 2013] Source is confused with source 33
[Fri May 17 14:16:28 2013] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Fri May 17 14:16:28 2013] Initial guess for spatial extent in simple fitting = 10.14"
[Fri May 17 14:16:28 2013] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.842
[Fri May 17 14:16:28 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.14"
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22.csv
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22.csv
[Fri May 17 17:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri May 17 17:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:51 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 22.340912 pixels away
[Fri May 17 20:37:51 2013] Warning, spatial fit 22 centroid is now closest to src. 35
[Fri May 17 20:37:51 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:51 2013] Assessing source extent using major
[Fri May 17 20:37:51 2013] Source does appear to be extended
[Fri May 17 20:37:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:41:31 2013] XMMSAS src. selection expression = ellipse(21990.635345, 17909.548660, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:41:31 2013] Writing source region out to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_src.reg
[Fri May 17 21:41:31 2013] Extracting stamp from image fullrun_mos1_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (216, 169) - (291, 244)
[Fri May 17 21:41:31 2013] XMMSAS bgd. selection expression = annulus(21990.635345, 17909.548660, 1087.500000, 2175.000000, X, Y) && !ellipse(23654.605000, 18235.265800, 954.264027, 954.264027, 0.000000, X, Y) && !ellipse(23570.059174, 19094.809494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24759.172455, 16988.311905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20944.288600, 18502.019400, 795.952023, 795.952023, 0.000000, X, Y) && !ellipse(23517.986084, 19606.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.340000, 17698.522000, 1585.312046, 1585.312046, 0.000000, X, Y) && !ellipse(22127.256516, 18997.461517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.223495, 19025.294189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.846000, 18505.002800, 3299.520095, 2536.440073, -0.000000, X, Y) && !ellipse(24488.512000, 21187.994000, 1379.088040, 1048.872030, 148.040000, X, Y)
[Fri May 17 21:41:31 2013] Writing fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32.gif
[Fri May 17 21:50:17 2013] Mean detx,y = (6814.54, -4732.43) 
[Fri May 17 21:50:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:50:34 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:50:34 2013] Setting source spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri May 17 21:50:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri May 17 22:19:57 2013] Not generating rmf since there are only 72 counts
[Fri May 17 22:19:57 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:44 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:44 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 317.00
[Fri May 17 23:23:44 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_bgd.pi.gz = 44.00
[Fri May 17 23:23:44 2013] Got source and background scale factors 1166458.000000, 473440.000000
[Fri May 17 23:23:44 2013] User source parameters:
  Position = (253.3, 206.4) = 2 6 7.18 64 49 5.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 208.6 +/- 18.8
  Background aperture counts = 108.4
  Rate = 0.007 +/- 0.0006

[Fri May 17 23:23:44 2013] Updating counts from extracted products
[Fri May 17 23:23:44 2013] Set source signif. to 208.59/10.41 = 20.03
[Fri May 17 23:23:46 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:46 2013] Using photon index=1.80, rate=0.00684, arf fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32.arf
[Fri May 17 23:23:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:46 2013] Updating source flux to 2.1e-13
[Fri May 17 23:23:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:01 2013] xmm0153752001/analysis//spectral/fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete