[Fri May 17 02:59:50 2013] Detection parameters:
  Position = (298.3, 200.0) = 2 5 36.56 64 48 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.4 +/- 27.5
  Background counts = 55.3
  Rate = 0.02 +/- 0.001

[Fri May 17 02:59:52 2013] Off-axis axis estimate = 7.13'
[Fri May 17 05:41:43 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri May 17 05:41:43 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Fri May 17 05:41:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Fri May 17 05:41:43 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.00"
[Fri May 17 08:51:29 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4.ximg exists
[Fri May 17 08:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4.csv
[Fri May 17 08:51:29 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri May 17 08:51:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4.csv
[Fri May 17 08:51:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri May 17 08:51:30 2013] Fit fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri May 17 12:09:16 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Fri May 17 12:09:16 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:16 2013] Assessing source extent using major
[Fri May 17 12:09:16 2013] Source does appear to be extended
[Fri May 17 12:09:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:16 2013] Source is confused with source 4
[Fri May 17 12:09:16 2013] Source is confused with source 39
[Fri May 17 14:16:28 2013] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri May 17 14:16:28 2013] Initial guess for spatial extent in simple fitting = 10.00"
[Fri May 17 14:16:28 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Fri May 17 14:16:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.00"
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4.csv
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4.csv
[Fri May 17 17:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May 17 17:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:51 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Fri May 17 20:37:51 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:51 2013] Assessing source extent using major
[Fri May 17 20:37:51 2013] Source does appear to be extended
[Fri May 17 20:37:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:41:30 2013] XMMSAS src. selection expression = ellipse(25900.434143, 17354.736481, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:41:30 2013] Writing source region out to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_src.reg
[Fri May 17 21:41:30 2013] Extracting stamp from image fullrun_mos1_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (261, 163) - (336, 238)
[Fri May 17 21:41:30 2013] XMMSAS bgd. selection expression = annulus(25900.434143, 17354.736481, 1087.500000, 2175.000000, X, Y) && !ellipse(25608.593323, 18928.783875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.856000, 18152.570000, 1602.136046, 1602.136046, 0.000000, X, Y) && !ellipse(25410.944977, 17272.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27308.398834, 19154.442780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26645.347748, 17342.983994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23654.605000, 18235.265800, 954.264027, 954.264027, 0.000000, X, Y) && !ellipse(26806.522000, 16798.498000, 1570.880045, 1570.880045, 0.000000, X, Y) && !ellipse(26975.991821, 20213.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23570.059174, 19094.809494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.305600, 19966.808000, 1381.384040, 1381.384040, 0.000000, X, Y) && !ellipse(24759.172455, 16988.311905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27998.066589, 19340.037292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28039.386810, 19848.070511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23517.986084, 19606.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22597.340000, 17698.522000, 1585.312046, 1585.312046, 0.000000, X, Y) && !ellipse(28478.908000, 18896.944200, 1536.016044, 1536.016044, 0.000000, X, Y) && !ellipse(27167.501740, 17608.129822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28494.413696, 18386.997269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.288147, 17875.491272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.846000, 18505.002800, 3299.520095, 2536.440073, -0.000000, X, Y)
[Fri May 17 21:41:30 2013] Writing fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3.gif
[Fri May 17 21:44:04 2013] Mean detx,y = (4280.78, -7676.27) 
[Fri May 17 21:44:05 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:44:16 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:44:16 2013] Setting source spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 17 21:44:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 17 21:58:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 21:58:42 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:42 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:42 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1674.00
[Fri May 17 23:23:42 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_bgd.pi.gz = 204.00
[Fri May 17 23:23:42 2013] Got source and background scale factors 1331200.000000, 1259622.000000
[Fri May 17 23:23:42 2013] User source parameters:
  Position = (298.3, 200.0) = 2 5 36.56 64 48 33.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1458.4 +/- 41.9
  Background aperture counts = 215.6
  Rate = 0.05 +/- 0.001

[Fri May 17 23:23:42 2013] Updating counts from extracted products
[Fri May 17 23:23:42 2013] Set source signif. to 1458.41/14.68 = 99.33
[Fri May 17 23:23:46 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:46 2013] Using photon index=1.80, rate=0.0478, arf fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3.arf
[Fri May 17 23:23:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:46 2013] Updating source flux to 1.1e-12
[Fri May 17 23:23:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:01 2013] xmm0153752001/analysis//spectral/fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete