[Fri May 17 02:59:51 2013] Detection parameters:
  Position = (322.4, 222.9) = 2 5 20.11 64 50 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.7 +/- 19.5
  Background counts = 59.6
  Rate = 0.007 +/- 0.0009

[Fri May 17 02:59:52 2013] Off-axis axis estimate = 5.75'
[Fri May 17 05:41:43 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Fri May 17 05:41:43 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Fri May 17 05:41:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.898
[Fri May 17 05:41:43 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.30"
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16.csv
[Fri May 17 08:51:30 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri May 17 08:51:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16.csv
[Fri May 17 08:51:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 08:51:31 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri May 17 08:51:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri May 17 08:51:31 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri May 17 08:51:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16.csv
[Fri May 17 08:51:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 12:09:16 2013] Source 20 is offset by -4.398108 and 4.042888 pixels which is larger than
2 X fitted extent = 2.892547 x 1.218152, not incorporating fit results
[Fri May 17 12:09:16 2013] Vigneting correction estimate = 1.000000
[Fri May 17 12:09:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 12:09:16 2013] Assessing source extent using major
[Fri May 17 12:09:16 2013] Source does appear to be extended
[Fri May 17 12:09:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 12:09:16 2013] Source is confused with source 18
[Fri May 17 12:09:16 2013] Source is confused with source 27
[Fri May 17 14:16:28 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Fri May 17 14:16:28 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Fri May 17 14:16:28 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.898
[Fri May 17 14:16:28 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.30"
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14.csv
[Fri May 17 17:14:05 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri May 17 17:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14.csv
[Fri May 17 17:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 17 17:14:06 2013] fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May 17 17:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri May 17 17:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153752001_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 20:37:51 2013] Warning, spatial fit 14 centroid is now closest to src. 27
[Fri May 17 20:37:51 2013] Spatial fit model total counts = 2503.140000, observed total counts = 933.000000
[Fri May 17 20:37:51 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 17 20:37:51 2013] Vigneting correction estimate = 1.000000
[Fri May 17 20:37:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 17 20:37:51 2013] Assessing source extent using major
[Fri May 17 20:37:51 2013] Source does appear to be extended
[Fri May 17 20:37:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 21:41:30 2013] XMMSAS src. selection expression = ellipse(27998.066589, 19340.037292, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 21:41:30 2013] Writing source region out to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_src.reg
[Fri May 17 21:41:30 2013] Extracting stamp from image fullrun_mos1_xmm0153752001_pi300-10000_cl_sm2.00.img.gz, (285, 185) - (360, 260)
[Fri May 17 21:41:30 2013] XMMSAS bgd. selection expression = annulus(27998.066589, 19340.037292, 1087.500000, 2175.000000, X, Y) && !ellipse(25608.593323, 18928.783875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.856000, 18152.570000, 1602.136046, 1602.136046, 0.000000, X, Y) && !ellipse(25900.434143, 17354.736481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.944977, 17272.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27308.398834, 19154.442780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26645.347748, 17342.983994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26806.522000, 16798.498000, 1570.880045, 1570.880045, 0.000000, X, Y) && !ellipse(26975.991821, 20213.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.305600, 19966.808000, 1381.384040, 1381.384040, 0.000000, X, Y) && !ellipse(28039.386810, 19848.070511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28478.908000, 18896.944200, 1536.016044, 1536.016044, 0.000000, X, Y) && !ellipse(27167.501740, 17608.129822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28494.413696, 18386.997269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.288147, 17875.491272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.290200, 21830.448000, 1331.936038, 1331.936038, 0.000000, X, Y) && !ellipse(24488.512000, 21187.994000, 1379.088040, 1048.872030, 148.040000, X, Y)
[Fri May 17 21:41:30 2013] Writing fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20.gif
[Fri May 17 21:47:21 2013] Mean detx,y = (1477.73, -7647.09) 
[Fri May 17 21:47:22 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 21:47:36 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 21:47:36 2013] Setting source spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May 17 21:47:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May 17 22:09:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 22:09:29 2013] rmf not generated due to insufficient counts
[Fri May 17 23:23:43 2013] Updating aperture counts using extracted products
[Fri May 17 23:23:43 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 1004.00
[Fri May 17 23:23:43 2013] Total counts from fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_bgd.pi.gz = 327.00
[Fri May 17 23:23:43 2013] Got source and background scale factors 1334400.000000, 2004717.000000
[Fri May 17 23:23:43 2013] User source parameters:
  Position = (322.4, 222.9) = 2 5 20.11 64 50 12.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 786.3 +/- 32.7
  Background aperture counts = 217.7
  Rate = 0.03 +/- 0.001

[Fri May 17 23:23:43 2013] Updating counts from extracted products
[Fri May 17 23:23:43 2013] Set source signif. to 786.34/14.75 = 53.30
[Fri May 17 23:23:46 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 23:23:46 2013] Using photon index=1.80, rate=0.0258, arf fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20.arf
[Fri May 17 23:23:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 23:23:46 2013] Updating source flux to 5.5e-13
[Fri May 17 23:23:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 23:24:01 2013] xmm0153752001/analysis//spectral/fullrun_mos1_xmm0153752001_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete