[Wed Mar 14 19:08:22 2012] Detection parameters:
  Position = (241.2, 219.1) = 2 5 27.59 64 42 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.7 +/- 27.4
  Background counts = 34.0
  Rate = 0.04 +/- 0.002

[Wed Mar 14 19:08:23 2012] Off-axis axis estimate = 7.09'
[Wed Mar 14 19:12:47 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 19:12:47 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Mar 14 19:12:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Wed Mar 14 19:12:47 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.97"
[Wed Mar 14 21:20:26 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7.ximg exists
[Wed Mar 14 21:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7.csv
[Wed Mar 14 21:20:26 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Mar 14 21:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7.csv
[Wed Mar 14 21:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 21:20:26 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Mar 14 21:20:26 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Mar 14 21:20:26 2012] Fit fullrun_pn_xmm0153751801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Mar 15 02:58:32 2012] Spatial fit model total counts = 630.520000, observed total counts = 580.000000
[Thu Mar 15 02:58:32 2012] Offset between fit and detection position for source 7 = 0.218589 pixels
[Thu Mar 15 02:58:32 2012] 640.138000 total counts/ 314.328000 bgd. counts: snr = 18.376926
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.218589 pixels
  Position = (241.4, 219.2) = 2 5 27.45 64 42 42.0
  Extent = 5.5 (5.0-6.0)", rotation angle = 0
  Source counts = 325.8 +/- 25.3
  Background counts = 314.3
  Rate = 0.02 +/- 0.001
[Thu Mar 15 02:58:32 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 02:58:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 02:58:32 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 02:58:32 2012] Source does appear to be extended
[Thu Mar 15 02:58:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 02:59:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 02:59:02 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Thu Mar 15 02:59:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.961
[Thu Mar 15 02:59:02 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 5.51"
[Thu Mar 15 05:33:12 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6.ximg exists
[Thu Mar 15 05:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6.csv
[Thu Mar 15 05:33:12 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Mar 15 05:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6.csv
[Thu Mar 15 05:33:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 05:33:12 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Mar 15 05:33:12 2012] fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Mar 15 05:33:12 2012] Fit fullrun_pn_xmm0153751801_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Mar 15 10:23:00 2012] Spatial fit model total counts = 630.472000, observed total counts = 580.000000
[Thu Mar 15 10:23:00 2012] Offset between fit and detection position for source 7 = 0.000305 pixels
[Thu Mar 15 10:23:00 2012] 640.082000 total counts/ 314.084000 bgd. counts: snr = 18.394671
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000305 pixels
  Position = (241.4, 219.2) = 2 5 27.45 64 42 42.0
  Extent = 5.5 (5.0-6.1)", rotation angle = 0
  Source counts = 326.0 +/- 25.3
  Background counts = 314.1
  Rate = 0.02 +/- 0.001
[Thu Mar 15 10:23:00 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 10:23:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 10:23:00 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 10:23:00 2012] Source does appear to be extended
[Thu Mar 15 10:23:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 10:23:43 2012] XMMSAS src. selection expression = ellipse(20951.693400, 19021.585000, 331.013410, 331.013410, 0.000000, X, Y)
[Thu Mar 15 10:23:43 2012] Writing source region out to fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_src.reg
[Thu Mar 15 10:23:43 2012] Extracting stamp from image fullrun_pn_xmm0153751801_pi300-10000_cl_sm2.00.img.gz, (222, 200) - (260, 238)
[Thu Mar 15 10:23:43 2012] XMMSAS bgd. selection expression = annulus(20951.693400, 19021.585000, 551.689016, 1103.378032, X, Y)
[Thu Mar 15 10:23:43 2012] Writing fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7.gif
[Thu Mar 15 10:42:03 2012] Mean detx,y = (72.67, -6944.47) 
[Thu Mar 15 10:42:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 10:42:32 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 10:42:33 2012] Setting source spectrum file to fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Mar 15 10:42:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Mar 15 16:25:10 2012] Updating aperture counts using extracted products
[Thu Mar 15 16:25:10 2012] Error reading totcts from fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Mar 15 16:25:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 16:25:12 2012] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7.arf
[Thu Mar 15 16:25:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 16:25:12 2012] Updating source flux to 6.8e-14
[Thu Mar 15 16:34:29 2012] Reading fit data from xmm0153751801/analysis//spectral/fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_pl.csv
[Thu Mar 15 16:34:29 2012] Spectral fit parameter nH value = 5.41085e+21
[Thu Mar 15 16:34:29 2012] Spectral fit parameter PhoIndex value = 1.77515
[Thu Mar 15 16:34:29 2012] Failed to get F(0.3-8.0) from xmm0153751801/analysis//spectral/fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 16:34:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 16:34:29 2012] Using Nh = 5.4e+21, photon index=1.78, rate=0.0171, arf fullrun_pn_xmm0153751801_pi300-10000_pass1_cl_src7.arf
[Thu Mar 15 16:34:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 16:34:29 2012] Updating source flux to 1.4e-13