[Mon Jun 11 17:02:11 2012] Detection parameters:
  Position = (255.9, 225.6) = 2 5 31.63 64 48 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 414.0 +/- 29.0
  Background counts = 142.3
  Rate = 0.03 +/- 0.002

[Mon Jun 11 17:02:12 2012] Off-axis axis estimate = 6.11'
[Mon Jun 11 17:03:37 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 17:03:37 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 11 17:03:37 2012] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.939
[Mon Jun 11 17:03:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.49"
[Mon Jun 11 18:32:28 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 11 18:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4.csv
[Mon Jun 11 18:32:28 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 11 18:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4.csv
[Mon Jun 11 18:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 18:32:29 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 11 18:32:29 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 11 18:32:29 2012] Fit fullrun_pn_xmm0153751701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jun 11 18:47:28 2012] Warning, spatial fit 4 centroid is now closest to src. 9
[Mon Jun 11 18:47:28 2012] Source 5 is offset by 1.912198 and 2.920371 pixels which is larger than
2 X fitted extent = 1.061600 x 1.061600, not incorporating fit results
[Mon Jun 11 18:47:28 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.495195 pixels away
[Mon Jun 11 18:47:28 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 18:47:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 18:47:28 2012] Assessing source extent using major
[Mon Jun 11 18:47:28 2012] Source does appear to be extended
[Mon Jun 11 18:47:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 18:47:28 2012] Source is confused with source 8
[Mon Jun 11 18:47:28 2012] Source is confused with source 24
[Mon Jun 11 18:47:28 2012] Source is confused with source 26
[Mon Jun 11 18:47:34 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 18:47:34 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Mon Jun 11 18:47:34 2012] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.939
[Mon Jun 11 18:47:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.49"
[Mon Jun 11 20:15:53 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 11 20:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3.csv
[Mon Jun 11 20:15:53 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 11 20:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3.csv
[Mon Jun 11 20:15:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 20:15:53 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 11 20:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 11 20:15:53 2012] fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 11 20:15:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 11 20:15:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153751701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 20:34:02 2012] Warning, spatial fit 3 centroid is now closest to src. 22
[Mon Jun 11 20:34:02 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 20:34:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 20:34:02 2012] Assessing source extent using major
[Mon Jun 11 20:34:02 2012] Source does appear to be extended
[Mon Jun 11 20:34:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 20:34:08 2012] XMMSAS src. selection expression = ellipse(22213.185211, 19581.046249, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 11 20:34:08 2012] Writing source region out to fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 11 20:34:08 2012] Extracting stamp from image fullrun_pn_xmm0153751701_pi300-10000_cl_sm2.00.img.gz, (218, 188) - (293, 263)
[Mon Jun 11 20:34:09 2012] XMMSAS bgd. selection expression = annulus(22213.185211, 19581.046249, 1087.500000, 2175.000000, X, Y) && !ellipse(21069.826000, 21091.862400, 1519.712044, 1519.712044, 0.000000, X, Y) && !ellipse(24085.222473, 21383.669098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19614.230000, 21006.680000, 3163.408091, 3163.408091, 0.000000, X, Y) && !ellipse(22668.589111, 20011.780945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19696.222748, 21873.871140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24746.125641, 21607.486740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19516.316635, 21357.693619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19013.536000, 20538.588000, 1581.704046, 1581.704046, 0.000000, X, Y) && !ellipse(24139.488617, 20920.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23433.224274, 20485.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23073.356000, 19638.894000, 1447.216042, 1447.216042, 0.000000, X, Y) && !ellipse(20125.692322, 19811.451019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22281.151306, 19102.044449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22845.576000, 22449.784000, 1287.432037, 1287.432037, 0.000000, X, Y) && !ellipse(23704.547028, 19968.677872, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 20:34:09 2012] Writing fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5.gif
[Mon Jun 11 20:35:13 2012] Mean detx,y = (-3348.53, -5524.32) 
[Mon Jun 11 20:35:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 20:35:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 20:35:24 2012] Setting source spectrum file to fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 20:35:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 11 20:51:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 20:51:19 2012] rmf not generated due to insufficient counts
[Mon Jun 11 21:11:29 2012] Updating aperture counts using extracted products
[Mon Jun 11 21:11:29 2012] Error reading totcts from fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 21:11:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:11:29 2012] Using photon index=1.80, rate=0.0342, arf fullrun_pn_xmm0153751701_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 21:11:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:11:29 2012] Updating source flux to 1.3e-13
[Mon Jun 11 21:11:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting