[Wed Dec 28 14:54:09 2011] Detection parameters:
  Position = (227.0, 310.2) = 5 34 58.91 22 0 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.4 +/- 28.3
  Background counts = 378.8
  Rate = 0.02 +/- 0.004

[Wed Dec 28 14:54:14 2011] Off-axis axis estimate = 5.25'
[Thu Dec 29 11:51:43 2011] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 11:51:43 2011] Initial guess for spatial extent in simple fitting = 9.05"
[Thu Dec 29 11:51:43 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.126
[Thu Dec 29 11:51:43 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 9.05"
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95.csv
[Fri Dec 30 09:22:49 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95_1.ximg exists
[Fri Dec 30 09:22:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95.csv
[Fri Dec 30 09:22:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Fri Dec 30 09:22:54 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Fri Dec 30 09:22:54 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Fri Dec 30 09:24:16 2011] Source 85 is offset by 8.368322 and 0.573992 pixels which is larger than
2 X fitted extent = 1.040363 x 1.040363, not incorporating fit results
[Fri Dec 30 09:24:17 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 09:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 09:24:17 2011] Assessing source extent using major
[Fri Dec 30 09:24:17 2011] Source does appear to be extended
[Fri Dec 30 09:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:06:16 2011] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 31 00:06:16 2011] Initial guess for spatial extent in simple fitting = 9.05"
[Sat Dec 31 00:06:16 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.126
[Sat Dec 31 00:06:16 2011] Giving source the simple spatial ID 87 for pass 1, mean size = 9.05"
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87.csv
[Sat Dec 31 22:04:17 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87_1.ximg exists
[Sat Dec 31 22:04:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87.csv
[Sat Dec 31 22:04:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Sat Dec 31 22:04:22 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Sat Dec 31 22:04:22 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Sat Dec 31 22:05:35 2011] Warning, spatial fit 87 centroid is now closest to src. 9
[Sat Dec 31 22:05:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 22:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 22:05:36 2011] Assessing source extent using major
[Sat Dec 31 22:05:36 2011] Source does appear to be extended
[Sat Dec 31 22:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 22:05:36 2011] Source is confused with source 9
[Sun Jan  1 04:48:27 2012] XMMSAS src. selection expression = ellipse(19704.452011, 26935.035339, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing source region out to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85_src.reg
[Sun Jan  1 04:48:27 2012] Extracting stamp from image fullrun_mos2_xmm0153750501_pi300-10000_cl_sm2.00.img.gz, (190, 273) - (265, 348)
[Sun Jan  1 04:48:27 2012] XMMSAS bgd. selection expression = annulus(19704.452011, 26935.035339, 1087.500000, 2175.000000, X, Y) && !ellipse(20217.271200, 26779.020000, 1278.664037, 1278.664037, 0.000000, X, Y) && !ellipse(20108.427200, 27953.326000, 1446.703486, 1446.703486, 0.000000, X, Y) && !ellipse(20378.793610, 27431.215179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20464.604156, 29613.373138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20305.351517, 26314.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20434.169556, 28720.003571, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 04:48:27 2012] Writing fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85.gif
[Sun Jan  1 07:35:28 2012] Mean detx,y = (7407.71, -935.86) 
[Sun Jan  1 07:35:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 07:35:45 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 07:35:45 2012] Setting source spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sun Jan  1 07:35:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Sun Jan  1 12:09:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 12:09:26 2012] rmf not generated due to insufficient counts
[Sun Jan  1 13:13:54 2012] Updating aperture counts using extracted products
[Sun Jan  1 13:13:54 2012] Error reading totcts from fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sun Jan  1 13:14:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 13:14:00 2012] Using photon index=1.80, rate=0.0178, arf fullrun_mos2_xmm0153750501_pi300-10000_pass1_cl_src85.arf
[Sun Jan  1 13:14:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 13:14:00 2012] Updating source flux to 3.3e-13
[Sun Jan  1 13:24:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting