[Wed Dec 28 14:54:09 2011] Detection parameters: Position = (394.0, 336.9) = 5 34 6.68 22 2 17.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 324.1 +/- 30.4 Background counts = 248.6 Rate = 0.04 +/- 0.004 [Wed Dec 28 14:54:13 2011] Off-axis axis estimate = 7.47' [Thu Dec 29 11:51:42 2011] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting [Thu Dec 29 11:51:42 2011] Initial guess for spatial extent in simple fitting = 10.16" [Thu Dec 29 11:51:42 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.932 [Thu Dec 29 11:51:42 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 10.16" [Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45.ximg exists [Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45.csv [Fri Dec 30 09:22:46 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45_1.ximg exists [Fri Dec 30 09:22:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45.csv [Fri Dec 30 09:22:46 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists [Fri Dec 30 09:22:52 2011] fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists [Fri Dec 30 09:22:52 2011] Fit fullrun_mos2_xmm0153750501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly [Fri Dec 30 09:24:16 2011] Warning, spatial fit 45 centroid is now closest to src. 69 [Fri Dec 30 09:24:16 2011] Spatial fit model total counts = 4189.820000, observed total counts = 4190.000000 [Fri Dec 30 09:24:16 2011] Offset between fit and detection position for source 76 = 0.552537 pixels [Fri Dec 30 09:24:16 2011] Warning, changing simple spatial fit ID from 45 to 74 [Fri Dec 30 09:24:16 2011] 4019.470100 total counts/ 3980.610000 bgd. counts: snr = 0.615927 Spatial fit parameters: Offset between fit and detection position for source 76 = 0.552537 pixels Position = (394.4, 337.3) = 5 34 6.55 22 2 18.7 Extent = 2.6" x 2.6", rotation angle = 0 Source counts = 38.9 +/- 63.4 Background counts = 3980.6 Rate = 0.003 +/- 0.006 Deleting source due to low Poisson probability